Template:Cite episode/doc

__EXPECTED_UNCONNECTED_PAGE__

Citation Style 1 templates
Some attributes
First	Unknown
Second	Unknown
Third	Unknown
Other attributes

This Citation Style 1 template is used to create citations for television or radio programs and episodes.

Usage

Copy a blank version to use. Almost all parameter names are supported only in lower case (some initialisms, such as |isbn= have upper-case aliases like |ISBN=, which are acceptable for use). Use the "|" (pipe) character between each parameter. Unused parameters may be deleted to avoid clutter in the edit window. Some samples on this documentation page may include the current date. If the date is not current, then the page.

Most-commonly-used parameters in horizontal format

{{cite episode |credits= |last= |first= |date= |title= |url= |location= |series= |series-link= |season=<!-- usually for North American shows --> |series-no=<!-- usually for non–North American shows --> |issue= <!-- Alias: |number= ; the episode number --> |episode-link= |language= |publisher= |minutes= |time= |network= |station= |transcript= |transcript-url= |access-date= |quote= |trans-quote=}}

Full parameter set in horizontal format

{{cite episode |credits= |last1= |first1= |author-link1= |last2= |first2= |author-link2= |display-authors= |author-mask1= |author-mask2= |collaboration= |date= |year= |orig-date= |title= |script-title= |title-link= |url= |url-access= |trans-title= |format= |location= |editor-last1= |editor-first1= |editor-link1= |editor-last2= |editor-first2= |editor-link2= |display-editors= |editor-mask1= |editor-mask2= |series= |series-link= |department= |type= |season= |series-no= |issue= |episode-link= |language= |edition= |publication-place= |publisher= |publication-date= |minutes= |time-caption= |time= |arxiv= |asin= |asin-tld= |bibcode= |bibcode-access= |biorxiv= |citeseerx= |doi= |doi-access= |doi-broken-date= |eissn= |hdl= |hdl-access= |isbn= |ismn= |issn= |jfm= |jstor= |jstor-access= |lccn= |medrxiv= |mr= |oclc= |ol= |ol-access= |osti= |osti-access= |pmc= |pmc-embargo-date= |pmid= |rfc= |sbn= |ssrn= |s2cid= |s2cid-access= |zbl= |network= |station= |url-status= |archive-url= |archive-format= |archive-date= |via= |transcript= |transcript-url= |transcript-format= |access-date= |quote= |script-quote= |trans-quote= |ref= |postscript=}}

Most-commonly-used parameters in vertical format

{{cite episode |credits = |last = |first = |date = |title = |url = |location = |series = |series-link = |season = <!-- usually for North American shows --> |series-no = <!-- usually for non-North American shows --> |issue = |episode-link = |language = |publisher = |minutes = |time = |network = |station = |transcript = |transcript-url = |access-date = |quote = |trans-quote = }}

Full parameter set in vertical format

Parameters	Prerequisites	Brief instructions / notes	Vertical list
credits		Can be wikilinked, unlike other author-related parameters.	{{cite episode |credits = |last1 = |first1 = |author-link1 = |last2 = |first2 = |author-link2 = |display-authors = |author-mask1 = |author-mask2 = |collaboration = |df = |date = |year = |orig-date = |title = |script-title = |title-link = |url = |url-access = |trans-title = |format = |location = |editor-last1 = |editor-first1 = |editor-link1 = |editor-last2 = |editor-first2 = |editor-link2 = |display-editors = |editor-mask1 = |editor-mask2 = |name-list-style = |series = |series-link = |department = |type = |season = |series-no = |issue = |episode-link = |language = |edition = |publication-place = |publisher = |publication-date = |minutes = |time-caption = |time = |arxiv = |asin = |asin-tld = |bibcode = |bibcode-access = |biorxiv = |citeseerx = |doi = |doi-access = |doi-broken-date = |eissn = |hdl = |hdl-access = |isbn = |ismn = |issn = |jfm = |jstor = |jstor-access = |lccn = |medrxiv = |mr = |oclc = |ol = |ol-access = |osti = |osti-access = |pmc = |pmc-embargo-date = |pmid = |rfc = |sbn = |ssrn = |s2cid = |s2cid-access = |zbl = |network = |station = |url-status = |archive-url = |archive-format = |archive-date = |transcript = |transcript-url = |transcript-format = |access-date = |via = |quote = |script-quote = |trans-quote = |mode = |ref = |postscript = }}
last1		Author's last name or single name author. Don't link.
first1	last1	Author's first name. Don't link.
author-link1	last1	Title of Wikipedia article about the first author. Don't link.
last2	last1	Like last1, but for 2nd author. Don't link. Similar: last3, etc.
first2	last2	Like first1, but for 2nd author. Don't link. Similar: first3, etc.
author-link2	last2	Like author-link1, but for 2nd author. Don't link. Similar: author-link3, etc.
display-authors	last1	Number (number of authors displayed) or etal (more authors)
author-mask1	last1	See Display options below; not for lists of cited works
author-mask2	last2
collaboration	last1
df
date
year
orig-date	date or year ||
orig-year	date or year ||
title		This parameter is required.
script-title
title-link	title, script-title, season, series-no , or issue	choose one: title-link, or episode-link. Name of a Wikipedia article about the work. Note that if url isn't defined, this parameter refers to title instead of season, series-no , or issue .
url	title or script-title
url-access	url
trans-title	title or script-title
format	url
location	publisher	can be used for written-at location when publication-place is used for publication place
editor-last1		Like last1, but for editor. Don't link.
editor-first1	editor-last1	Like first1, but for editor. Don't link.
editor-link1	editor-last1	Like author-link1, but for editor. Don't link.
editor-last2	editor-last1	Like last1, but for 2nd editor. Don't link. Similar: editor-last3, etc.
editor-first2	editor-last2	Like first1, but for 2nd editor. Don't link. Similar: editor-first3, etc.
editor-link2	editor-last2	Like author-link1, but for 2nd editor. Don't link. Similar: editor-link3, etc.
display-editors	editor-last1	Like display-authors, but for editors
editor-mask1	editor-last1	See Display options below; not for lists of cited works
editor-mask2	editor-last2
name-list-style	last2	Set to amp or ampersand to separate the last author with " & "; set to and to separate with " and "
series		This parameter is required.
series-link	series
department
type
season		choose one: season, or series-no. Usually for North American shows.
series-no		choose one: season, or series-no. Usually for non-North American shows.
issue
episode-link	title, script-title, season, series-no , or issue	choose one: title-link, or episode-link. Name of a Wikipedia article about the work. Note that if url isn't defined, this parameter refers to title instead of season, series-no , or issue .
language
edition
publication-place	publisher
publisher
publication-date
minutes
time-caption	time
time
page		choose one: page, pages, or at
pages		choose one: page, pages, or at. Use when content on multiple pages supports the article text.
at		choose one: page, pages, or at
no-pp	page or pages	set to "yes" to suppress the "p." or "pp." before page numbers
arxiv
asin
asin-tld	asin
bibcode
biorxiv
citeseerx
doi
doi-access	doi
doi-broken-date	doi
eissn
hdl
hdl-access	hdl
isbn
ismn
issn
jfm
jstor
jstor-access	jstor
lccn
medrxiv
mr
oclc
ol
ol-access	ol
osti
osti-access	osti
pmc
pmc-embargo-date	pmc
pmid
rfc
sbn
ssrn
s2cid
s2cid-access	s2cid
zbl
network		Can be wikilinked.
station		Can be wikilinked.
url-status	archive-url
archive-url	archive-date , url ||
archive-format	archive-url
archive-date	archive-url
transcript
transcript-url	transcript
transcript-format	transcript
access-date	url
via
quote-page		choose one: quote-page, quote-pages
quote-pages		choose one: quote-page, quote-pages. Use when quote contains contents from multiple pages.
quote
script-quote
trans-quote
mode		cs1 or cs2
ref
postscript
If a field name is listed in the Prerequisites column, it is a prerequisite for the field to the left.

Examples

• {{cite episode |title=1968 |series=From the Earth to the Moon |first1=Ron |last1=Howard |first2=Brian |last2=Grazer |first3=Tom |last3=Hanks |first4=Michael |last4=Bostick |network=HBO |date=April 1998}}

  Howard, Ron; Grazer, Brian; Hanks, Tom; Bostick, Michael (April 1998). "1968". From the Earth to the Moon. HBO.

• {{cite episode |title=Billy Crystal, 2nd Visit |series=Inside the Actors Studio |date=8 October 2007 |url=http://www.bravotv.com/Inside_the_Actors_Studio/guest/Billy_Crystal_-_2nd_Visit |network=Bravo |season=13 |number=1307 |last=Lipton |first=James (host)}}

  Lipton, James (host) (8 October 2007). "Billy Crystal, 2nd Visit". Inside the Actors Studio. Season 13. Episode 1307. Bravo.

• {{cite episode |title=André the Giant |series=Biography |network=[[A&E (TV channel)|A&E]] |date=13 January 1999}}

  "André the Giant". Biography. 13 January 1999. A&E.

Parameters

Syntax

Nested parameters rely on their parent parameters:

• parent
• OR: parent2—may be used instead of parent
  • child—may be used with parent (and is ignored if parent is not used)
  • OR: child2—may be used instead of child (and is ignored if parent2 is not used)

Where aliases are listed, only one of the parameters may be defined; if multiple aliased parameters are defined, then only one will show.

By default, sets of fields are terminated with a period (.).

COinS

This template embeds COinS metadata in the HTML output, allowing reference management software to retrieve bibliographic metadata. See Wikipedia:COinS. As a general rule, only one data item per parameter. Do not include explanatory or alternate text:

• use |date=27 September 2007 not |date=27 September 2007 (print version 25 September)

Use of templates within the citation template is discouraged because many of these templates will add extraneous HTML or CSS that will be included raw in the metadata. Also, HTML entities, for example  , –, or  , should not be used in parameters that contribute to the metadata.

COinS metadata is created for these parameters

Note: This table of metadata is displayed in the documentation of all Citation Style 1 templates. Not all of these parameters are supported by every CS1 template. Some of these parameters are mutually exclusive, some are aliases of another parameter, and some require other parameters to be present. A full list of this template's supported parameters, their aliases, and their dependencies is shown in the Usage section near the top of this documentation page.

• |periodical=, |journal=, |newspaper=, |magazine=, |work=, |website=, |encyclopedia=, |encyclopaedia=, |dictionary=
• |chapter=, |script-chapter=, |contribution=, |script-contribution=, |entry=, |script-entry=, |article=, |script-article=, |section=, |script-section=
• |title=, |script-title=, |book-title=
• |publication-place=, |place=, |location=
• |date=, |year=, |publication-date=
• |series=, |version=
• |volume=, |issue=, |number=
• |page=, |pages=, |at=, |quote-page=, |quote-pages=
• |edition=
• |publisher=, |institution=
• |url=, |chapter-url=, |contribution-url=, |section-url=
• |author-last=, |author-last#=, |author#-last=, |author-surname=, |author-surname#=, |author#-surname=, |last=, |last#=, |surname=, |surname#=, |author=, |author#=, |subject=, |subject#=, |host=, |host#=
• |author-first=, |author-first#=, |author#-first=, |author-given=, |author-given#=, |author#-given=, |first=, |first#=, |given=, |given#=
• |degree=
• |arxiv=, |bibcode=, |biorxiv=, |citeseerx=, |doi=, |eissn=, |eprint=, |hdl=, |isbn=, |issn=, |jfm=, |jstor=, |lccn=, |message-id=, |mr=, |oclc=, |osti=, |pmc=, |pmid=, |rfc=, |ssrn=, |s2cid=, |zbl=

What's new

What's new or changed recently

Parameter	Description	Date
N/A

Description

Authors

• last: Surname of a single author. Do not wikilink—use author-link instead. For corporate authors or authors for whom only one name is listed by the source, use last or one of its aliases (e.g. |author=Bono). Aliases: surname, author, last1, surname1, author1.
  • author: this parameter is used to hold the name of an organizational author (e.g. a committee) or the complete name (first and last) of a single person; for the latter, prefer the use of |first= and |last=. This parameter should never hold the names of more than one author. Supports accept-this-as-written markup. Do not use italics in this field, as doing so produces corrupt metadata.
  • first: Given or first names of author; for example: Firstname Middlename or Firstname M. or Firstname M. Sr. Do not wikilink—use author-link instead. Aliases: given, first1, given1. Requires last; first name will not display if last is empty. Use generational and regnal suffixes only in accordance with MOS:JRSR and use honorifics (including Dr., Sir, and similar) only in accordance with MOS:HON.
  • OR: for multiple authors, use last1, first1 through lastn, firstn, where n is any consecutive number for an unlimited number of authors (each firstn requires a corresponding lastn, but not the other way around). See the display parameters to change how many authors are displayed. Aliases: surname1, given1 through surnamen, givenn, or author1 through authorn. For an individual author plus an institutional author, you can use |first1=...|last1=...|author2=....
  • author-link: Title of existing Wikipedia article about the author—not the author's website; do not wikilink. Aliases: author-link1, author1-link, authorlink.
  • OR: for multiple authors, use author-link1 through author-linkn. Aliases: author1-link through authorn-link.
  • name-list-style: accepts a limited list of keywords as value. When set to amp, ampersand, or &, inserts an ampersand between the last two names in a name list. When set to and, inserts the conjunction 'and' between the last two names of a name list. When set to vanc, displays name lists in Vancouver style when the lists use the last/first forms of name parameters. (Alternatively, {{CS1 config|name-list-style=vanc}} at the top of the page can do the same to every citation on the pages.)
• vauthors: comma-separated list of author names formatted as in the Vancouver system. Enclose corporate or institutional author names in doubled parentheses. End with etal if appropriate:

  |vauthors=Smythe JB, ((Megabux Corp.)), etal

  • author-link and author-mask may be used for the individual names in |vauthors= as described above
• translator-last: Surname of translator. Do not wikilink—use translator-link instead. Aliases: translator-surname, translator1, translator1-last, translator-last1. Supports accept-this-as-written markup.
  • translator-first: Given or first names of translator. Do not wikilink—use translator-link instead. Aliases: translator-given, translator1-first, translator-first1.
  • OR: for multiple translators, use translator-last1, translator-first1 through translator-lastn, translator-firstn, where n is any consecutive number for an unlimited number of translators (each translator-firstn requires a corresponding translator-lastn, but not the other way around). Aliases: translator1-last, translator1-first through translatorn-last, translatorn-first, or translator1 through translatorn.
  • translator-link: Title of existing Wikipedia article about the translator—not the translator's website; do not wikilink. Aliases: translator-link1, translator1-link.
  • OR: for multiple translators, use translator-link1 through translator-linkn. Aliases: translator1-link through translatorn-link.
• collaboration: Name of a group of authors or collaborators; requires author, last, or vauthors listing one or more primary authors; follows author name-list; appends "et al." to author name-list.
• Note: When using shortened footnotes or parenthetical referencing styles with templates, do not use multiple names in one field, or else the anchor will not match the inline link.

Aliases: credits, people.

Date

"Wikipedia:Undated" redirects here. For undated signatures, see Template:Undated.

• date: Date of referenced source. Can be full date (day, month, and year) or partial date (month and year, season and year, or year). Use same format as other publication dates in the citations. Do not wikilink. Displays after the authors and is enclosed in parentheses. If there is no author, then displays after the website and publisher. Aliases: airdate, air-date. For acceptable date formats, see Help:Citation Style 1 § Dates.

Shortened footnotes target full citations using the year specified in this parameter. A lowercase letter may be suffixed to the year to disambiguate {{sfn}} links to multiple works by the same author in the same year,^[more] unless the date is formatted as YYYY-MM-DD. In the latter case, year or ref is required to disambiguate the link targets.

For approximate year, precede with "c. ", like this: |date=c. 1900.

For no date, or "undated", use |date=n.d.

The date of a Web page, PDF, etc. with no visible date can sometimes be established by searching the page source or document code for a created or updated date; a comment for editors such as |date=2021-12-25<!--date from page source-->|orig-date=Original date 2011-01-01 can be added.

Automatic date formatting: Citation Style 1 and 2 templates, including this template, automatically render dates in all date parameters (such as |date=, |publication-date=, |access-date=, |archive-date=, etc.) except for |orig-date= in the style specified by the article's {{use dmy dates}} or {{use mdy dates}} template. See those templates' documentation for details.

• year: Year of publication. The more flexible |date= parameter also handles a year by itself. Do not use in combination with the |date= parameter, unless both of the following conditions are met:
  1. Shortened footnotes target multiple citations with same last name and year of publication. (This situation necessitates a CITEREF disambiguator, usually a lowercase letter suffixed to the year.)
  2. The |date= format is YYYY-MM-DD. (This format prevents the addition of a disambiguating letter to the year.)
• orig-date: Original publication date or year; displays in square brackets after the date (or year). For clarity, please supply specifics. For example: |orig-date=First published 1859 or |orig-date=Composed 1904. As |orig-date= does not support automatic date formatting, use the same date format as defined by |df= (or, if it exists in the article, by |cs1-dates= of a {{use dmy dates}} or {{use mdy dates}} template), or as used in the |date= parameter. Alias: orig-year
• df: date format; sets rendered dates to the specified format; does not support date ranges or seasonal dates; overrides the automatic date formatting described above. Accepts one value which may be one of these:

  dmy – set publication dates to day month year format; access- and archive-dates are not modified;

  mdy – as above for month day, year format

  ymd – as above for year initial numeric format YYYY-MM-DD

  dmy-all – set publication, access-, and archive-dates to day month year format;

  mdy-all – as above for month day, year format

  ymd-all – as above for year initial numeric format YYYY-MM-DD

Editors

• editor-last: surname of editor. Do not wikilink—use editor-link instead. Where the surname is usually written first—as in Chinese—or for corporate authors, simply use editor-last to include the same format as the source. Aliases: editor-last1, editor1-last, editor-surname, editor-surname1, editor1-surname, editor, editor1.
  • editor: This parameter is used to hold the complete name of a single editor (first and last), or the name of an editorial committee. This parameter should never hold the names of more than one editor. Supports accept-this-as-written markup.
  • editor-first: given or first names of editor, including title(s); example: Firstname Middlename or Firstname M. or Dr. Firstname M., Sr. Do not wikilink—use editor-link instead. Aliases: editor-first1, editor1-first, editor-given, editor-given1, editor1-given.
  • OR: for multiple editors, use editor-last1, editor-first1 through editor-lastn, editor-firstn (Aliases: editorn-last, editor-surnamen or editorn-surname; editorn-first, editor-givenn or editorn-given; editorn). For an individual editor plus an institutional editor, you can use |editor-first1=...|editor-last1=... |editor2=....
  • editor-link: title of existing Wikipedia article about the editor—not the editor's website; do not wikilink. Aliases: editor-link1.
  • OR: for multiple editors, use editor-link1 through editor-linkn (alias editorn-link).
  • name-list-style: accepts a limited list of keywords as value; when set to amp, ampersand, or &, inserts an ampersand between the last two names in a name list; when set to and, inserts the conjunction 'and' between the last two names of a name list; when set to vancdisplays name lists in Vancouver style when the lists use the last/first forms of name parameters.
• veditors: comma separated list of editor names in Vancouver style; enclose corporate or institutional names in doubled parentheses. End with etal if appropriate:

  |veditors=Smythe JB, ((Megabux Corp.)), etal

  • editor-linkn and editor-maskn may be used for the individual names in |veditors=, as described above
• Display:

  Use display-editors to control the length of the displayed editor name list and to specify when "et al." is included.

  If authors: Authors are first, followed by the included work, then "In" and the editors, then the main work.

  If no authors: Editors appear before the included work; a single editor is followed by "ed."; multiple editors are followed by "eds."

Title

(See also Help:Citation Style 1 § Titles and chapters.)

• title: Title of source. Can be wikilinked to an existing Wikipedia article or url may be used to add an external link, but not both. Displays in quotation marks. For titles containing quotation marks, convert regular quotation marks (") to single quotation marks ('). See MOS:QINQ for guidance in more complex situations. If script-title is defined, use title to hold a Romanization (if available) of the title in script-title.
  • script-title: Original title for languages that do not use a Latin-based script (Arabic, Chinese, Cyrillic, Greek, Hebrew, Japanese, Korean, etc.); not italicized, follows italicized Romanization defined in title (if present). Must be prefixed with one of the supported language codes to help browsers properly display the script:

    ... |title=Tōkyō tawā |script-title=ja:東京タワー |trans-title=Tokyo Tower ...

  • trans-title: English translation of the title if the source cited is in a foreign language. Displays in square brackets after title. Use of the language parameter is recommended.

Titles containing certain characters will not display and link correctly unless those characters are encoded.

newline	[	]	|
space	[	]	{{!}} (preferred)
	{{bracket|text}}		| or {{pipe}} – see also Help:Table § Rendering the pipe

• title-link: Title of existing Wikipedia article about the source named in title – do not use a web address; do not wikilink.

• type: Provides additional information about the media type of the source. May alternatively be used to identify the type of manuscript linked to in the title, if this is not the final version of a manuscript (e.g. if a preprint of a manuscript is freely available, but the version of record is behind a paywall). Format in sentence case. Displays in parentheses following the title. The reserved keyword none can be used to disable the display of a type. Examples: Thesis, Booklet, Accepted manuscript, CD liner, Press release. Alias: medium.
• episode-link: Wikilink to an existing Wikipedia article.

• series: The name of the series the episode belongs to; may be wikilinked.
  • series-link: name of an existing Wikipedia article; used to wikilink series; with proper interwiki prefix, may hold the name of an article at an other-language wikipedia; do not wikilink, do not use a URL.

• transcript: Transcript of the original source.
  • transcript-url: URL of the transcript.
  • transcript-format: File format of the work referred to by transcript-url; for example: DOC or XLS; HTML is implied and should not be specified. PDF is auto-detected and should not be specified.

• language: The language (or a comma-separated list of the languages) in which the source is written, as either the ISO 639 language code (preferred) or the full language name. Examples: |language=ru; |lang=fr, pt-br; |lang=Russian; |language=French, Portuguese. See the list of supported codes and names. Do not use templates or wikilinks. Displays in parentheses with "in" before the language name or names. When the only source language is English, no language is displayed in the citation. The use of languages recognized by the citation module adds the page to the appropriate subcategory of Category:CS1 foreign language sources. Because cs1|2 templates are often copied from en.wiki to other wikis, the use of language codes is preferred so that language names render in the correct language and form, e.g. espagnol at a French-language wiki instead of the English word "Spanish". Aliases: lang

URL

• url: URL of an online location where the text of the publication named by title can be found. Cannot be used if title is wikilinked. If applicable, the link may point to the specific page(s) referenced. Remove tracking parameters from URLs, e.g. #ixzz2rBr3aO94 or ?utm_source=google&utm_medium=...&utm_term=...&utm_campaign=.... For linking to pages in PDF files or in Google Books, see WP:PAGELINKS. Do not link to any commercial booksellers, such as Amazon; use |isbn= or |oclc= to provide neutral search links for books. Invalid URLs, including those containing spaces, will result in an error message.
  • access-date: Full date when the content pointed to by url was last verified to support the text in the article; do not wikilink; requires url; use the same format as other access and archive dates in the citations. Not required for linked documents that do not change. For example, access-date is required for online sources, such as personal websites, that do not have a publication date; see WP:CITEWEB. Access dates are not required for links to published research papers or published books. Note that access-date is the date that the URL was found to be working and to support the text being cited. See "Automatic date formatting" above for details about interaction with {{use dmy dates}} and {{use mdy dates}}. Can be hidden or styled by registered editors. Alias: accessdate.
  • archive-url: The URL of an archived snapshot of a web page. Typically used to refer to services such as Internet Archive (see Help:Using the Wayback Machine); requires archive-date and url. By default (overridden by |url-status=live) the archived link is displayed first, with the original link at the end. Alias: archiveurl.
    • archive-date: Archive service snapshot date; preceded in display by default text "archived from the original on". Use the same format as other access and archive dates in the citations. This does not necessarily have to be the same format that was used for citing publication dates. Do not wikilink; templated dates are discouraged. See "Automatic date formatting" above for details about interaction with {{use dmy dates}} and {{use mdy dates}}. Alias: archivedate.
    • url-status: A control parameter to select one of |url= or |archive-url= to link |title=; requires url and archive-url. Use {{dead link}} to mark dead |url= when there is no |archive-url=.

      Accepts multiple keywords:

      • dead – (default condition when |url-status= omitted or empty) selects |archive-url=
      • live – selects |url=; used when |url= is preemptively archived with |archive-url=
      • deviated – selects |archive-url=; used when |url= is still live but no longer supports the text in a Wikipedia article
      • unfit – selects |archive-url=; used when |url= links to vice (gambling, pornography), advertising, malware, phishing, compromised, other malicious, or other unsuitable page; links to |url= are suppressed in the rendering. If an entire domain is unsuitable, consider instead usurpation or blacklist. Bot help is available at WP:URLREQ
      • usurped – selects |archive-url=; used when the domain in |url= no longer serves its original intent, particularly when the domain has been (mis)appropriated by other entities such as vice, reseller, malware, phishing, compromised, other malicious, and advertising sites; links to |url= are suppressed in the rendering. Bot help is available at WP:URLREQ
      • bot: unknown – Editors may encounter this value which is left behind by a bot that has visited the reference and wasn't able to determine the status of the url. The page will be automatically placed in Category:CS1 maint: bot: original URL status unknown when this value is present, and per the instructions in that category, editors manually evaluate the state of the URL and change the parameter value appropriately.

    • archive-format: File format of the work referred to by archive-url; for example: DOC or XLS; displayed in parentheses after the archive link. HTML is implied and should not be specified. PDF is auto-detected and should not be specified. Does not change the external link icon (except for PDF). Note: External link icons do not include alt text; thus, they do not add file format information for the visually impaired. (This is not a concern with PDF, because the auto-detection will add "(PDF)" as descriptive text.) See Using |format=
  • url-access: See Access indicators discussion
• format: File format of the work referred to by url; for example: DOC or XLS; displayed in parentheses after title. (For media format, use type.) HTML is implied and should not be specified. PDF is auto-detected and should not be specified. Does not change the external link icon (except for PDF). Note: External link icons do not include alt text; thus, they do not add file format information for the visually impaired. (This is not a concern with PDF, because the auto-detection will add "(PDF)" as descriptive text.) See Using |format=

URLs must begin with a supported URI scheme. http:// and https:// will be supported by all browsers; however, ftp://, gopher://, irc://, ircs://, mailto: and news: may require a plug-in or an external application and should normally be avoided. IPv6 host-names are currently not supported.

If URLs in citation template parameters contain certain characters, then they will not display and link correctly. Those characters need to be percent-encoded. For example, a space must be replaced by %20. To encode the URL, replace the following characters with:

Character	space	"	'	<	>	[	]	{	|	}
Encoding	%20	%22	%27	%3C	%3E	%5B	%5D	%7B	%7C	%7D

Single apostrophes do not need to be encoded; however, unencoded multiples will be parsed as italic or bold markup. Single curly closing braces also do not need to be encoded; however, an unencoded pair will be parsed as the double closing braces for the template transclusion.

Department

• department: Regular department or section within the periodical or journal. Examples include "Communication", "Editorial", "Letter to the Editor", and "Review". Displays after title and is in plain text.

Edition

• edition: When the publication has more than one edition; for example: "2nd", "Revised", and so forth. Appends the string " ed." after the field, so |edition=2nd produces "2nd ed." Does not display if a periodical field is defined.

Publisher

• publisher: Name of publisher; may be wikilinked if relevant. The publisher is the company, organization or other legal entity that publishes the work being cited. For self-published works (i.e., where the publisher is the same as the author or creator) state |publisher=self-published. Do not use the publisher parameter for the name of a work (e.g. a website, book, encyclopedia, newspaper, magazine, journal, etc.). If the name of the publisher changed over time, use the name as stated in the publication or used at the time of the source's publication. Corporate designations such as "Ltd", "Inc.", or "GmbH" are not usually included. This parameter is most commonly used for books, and rarely for websites or periodicals (although it may be used instead of work in some cases). Omit where the publisher's name is substantially the same as the name of the work (for example, The New York Times Co. publishes The New York Times newspaper, so there is no reason to name the publisher). Displays after title.
• place: For news stories with a dateline, the location where the story was written. If the name of the location changed over time, use the name as stated in the publication or used at the time of the source's publication. In earlier versions of the template this was the publication place, and for compatibility, will be treated as the publication place if the publication-place parameter is absent; see that parameter for further information. Alias: location
• publication-place: Geographical place of publication; generally not wikilinked; omit when the name of the work includes the publication place, for example, The Boston Globe, The Times of India. Displays after the title. If the name of the publication place changed over time, use the name as stated in the publication or used at the time of the source's publication. If only one of publication-place, place, or location is defined, it will be treated as the publication place and will show after the title; if publication-place and place or location are defined, then place or location is shown before the title prefixed with "written at" and publication-place is shown after the title.
• publication-date: Date of publication when different from the date the work was written. If date (or year) is also defined and is different, then publication-date displays preceded by "published" and enclosed in parentheses, following publisher. If date (or year) is not defined, publication-date is displayed as date. Use the same format as other dates in the article; do not wikilink.
• via: Name of the content deliverer (if different from publisher). via is not a replacement for publisher, but provides additional detail. It may be used when the article is attributed to a different publication (e.g. in Yahoo News) but cannot be traced, when the content deliverer (e.g. NewsBank) presents the source in a format different from the original, when the URL provided does not make clear the identity of the deliverer, where no URL or DOI is available (e.g. EBSCOhost), or if the deliverer requests attribution. See the access level parameters to display access restrictions, and the agency parameters if the original source is a news agency or wire service.

In-source locations

• minutes: Time the event occurs in the source; followed by "minutes in".
• OR: time: Time the event occurs in the source; preceded by default text "Event occurs at".
  • time-caption: Changes the default text displayed before time.

• season: Season number, usually for US shows.
• OR: series-number: Series number, usually for British shows. Aliases: series-no.
• number: Many episodic shows are identified by separate season and episode numbers. Alternately, some shows prefer the format of a single episode number that includes the season within it; this format can be used by omitting the season field.

Identifiers

• network: The network the episode was aired on. (e.g. ABC, NBC, CBS, Fox, Disney, USA Network, BBC)
  • station: Call letters of the local station (if any).

The following identifiers create links and are designed to accept a single value. Using multiple values or other text will break the link and/or invalidate the identifier. In general, the parameters should include only the variable part of the identifier, e.g. |rfc=822 or |pmc=345678.

• arxiv: arXiv identifier; for example: |arxiv=hep-th/9205027 (before April 2007) or |arxiv=0706.0001 (April 2007 – December 2014) or |arxiv=1501.00001 (since January 2015). Do not include extraneous file extensions like ".pdf" or ".html". Aliases: eprint.
• asin: Amazon Standard Identification Number; if first character of asin value is a digit, use isbn. Because this link favours one specific distributor, include it only if standard identifiers are not available. Example |asin=B00005N5PF. Aliases: ASIN.
  • asin-tld: ASIN top-level domain for Amazon sites other than the US; valid values: Help:CS1 errors. Aliases: none.
• bibcode: bibcode; used by a number of astronomical data systems; for example: 1974AJ.....79..819H. Aliases: none.
• biorxiv: bioRxiv id, as in the entire DOI (e.g. 10.1101/078733 for http://biorxiv.org/content/early/2016/10/01/078733 or https://doi.org/10.1101/078733; 10.1101/2020.07.24.220400 for https://doi.org/10.1101/2020.07.24.220400). Aliases: none.
• citeseerx: (deprecated) CiteSeerX id, a string of digits and dots found in a CiteSeerX URL (e.g. 10.1.1.176.341 for https://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.176.341). Aliases: none.
• doi: Digital object identifier; for example: 10.1038/news070508-7. It is checked to ensure it begins with (10.). Aliases: DOI.
  • Supports accept-this-as-written markup to indicate valid DOIs using a non-standard format, see below.
  • doi-broken-date: Date a valid DOI was found to be non-working/inactive at https://doi.org. Use the same format as other dates in the article. Aliases: none.
• eissn: International Standard Serial Number for the electronic media of a serial publication; eight characters may be split into two groups of four using a hyphen, but not an en dash or a space; example |eissn=1557-2986. Aliases: EISSN.
  • Supports accept-this-as-written markup to indicate valid eISSNs using a non-standard format, see below.
• hdl: Handle System identifier for digital objects and other resources on the Internet; example |hdl=20.1000/100. Aliases: HDL.
• isbn: International Standard Book Number; for example: 978-0-8126-9593-9. (See Wikipedia:ISBN and ISBN § Overview.) Hyphens in the ISBN are optional, but preferred. Use the ISBN actually printed on or in the book. Use the 13-digit ISBN – beginning with 978 or 979 – when it is available. If only a 10-digit ISBN is printed on or in the book, use it. ISBNs can be found on the page with the publisher's information – usually the back of the title page – or beneath the barcode as a number beginning with 978 or 979 (barcodes beginning with any other numbers are not ISBNs). For sources with the older 9-digit SBN system, use sbn. Do not convert a 10-digit ISBN to 13-digit by just adding the 978 prefix; the last digit is a calculated check digit and just making changes to the numbers will make the ISBN invalid. This parameter should hold only the ISBN without any additional characters. It is checked for length, invalid characters – anything other than numbers, spaces, and hyphens, with "X" permitted as the last character in a 10-digit ISBN – and the proper check digit. Aliases: ISBN.
  • Use the {{Format ISBN}} template within the parameter – in the form |isbn={{Format ISBN|9780812695939}} – if you are unsure of how any particular ISBN should be hyphenated, as the pattern varies by country and publisher.
  • Supports accept-this-as-written markup to indicate valid ISBNs using a non-standard format, see below.
• ismn: International Standard Music Number; for example: 979-0-9016791-7-7. Hyphens or spaces in the ISMN are optional. Use the ISMN actually printed on or in the work. This parameter should hold only the ISMN without any additional characters. It is checked for length, invalid characters – anything other than numbers, spaces, and hyphens – and the proper check digit. Aliases: ISMN.
• issn: International Standard Serial Number; eight characters may be split into two groups of four using a hyphen, but not an en dash or a space; example |issn=2049-3630. Aliases: ISSN.
  • Supports accept-this-as-written markup to indicate valid ISSNs using a non-standard format, see below.
• jfm: Jahrbuch über die Fortschritte der Mathematik; do not include "JFM" in the value; example |jfm=53.0144.01. Aliases: JFM.
• jstor: JSTOR reference number; for example: |jstor=3793107. Aliases: JSTOR.
• lccn: Library of Congress Control Number. When present, alphabetic prefix characters are to be lower case and without a space; example |lccn=79-57364 or |lccn=2004042477 or |lccn=e09001178. Aliases: LCCN.
• mr: Mathematical Reviews; example |mr=630583. Aliases: MR.
• oclc: OCLC Number for looking up publications in the WorldCat union catalog; example |oclc=9355469. Aliases: OCLC.
• ol: Open Library identifier; do not include "OL" in the value; example |ol=7030731M. Aliases: OL.
• osti: Office of Scientific and Technical Information; example |osti=4367507. Aliases: OSTI.
• pmc: PubMed Central; use article number for open repository full-text of a journal article, e.g. |pmc=345678. Do not include "PMC" in the value. See also the pmid parameter, below; these are two different identifiers. Aliases: PMC.
  • pmc-embargo-date: Date that pmc goes live; if this date is in the future, then pmc is not linked until that date. Aliases: none.
• pmid: PubMed; use unique identifier; example |pmid=17322060 See also the pmc parameter, above; these are two different identifiers. Aliases: PMID.
• rfc: Request for Comments; example |rfc=3143. Aliases: RFC.
• sbn: Standard Book Number; example |sbn=356-02201-3. Aliases: SBN.
  • Supports accept-this-as-written markup to indicate valid SBNs using a non-standard format, see below.
• ssrn: Social Science Research Network; example |ssrn=1900856. Aliases: SSRN.
• s2cid: Semantic Scholar corpus ID; example |s2cid=37220927. Aliases: S2CID.
• zbl: Zentralblatt MATH; example |zbl=0472.53010 For zbMATH search results like JFM 35.0387.02 use |jfm=35.0387.02. Aliases: ZBL.

In very rare cases, identifiers are published which do not follow their defined standard format or use non-conforming checksums. These would typically cause an error message to be shown. Do not alter them to match a different checksum. In order to suppress the error message, some identifiers (|doi=, |eissn=, |isbn=, |issn=, and |sbn=) support a special accept-this-as-written markup which can be applied to disable the error-checking (as |<param>=((<value>))). If the problem is down to a mere typographical error in a third-party source, correct the identifier value instead of overriding the error message.

For some identifiers, it is possible to specify the access status using the corresponding |<param>-access= parameter.

For {{cite journal}}, some identifiers (specifying free resources) will automatically be linked to the title when |url= and |title-link= are not used to specify a different link target. This behaviour can be overridden by one out of a number of special keywords for |title-link= to manually select a specific source (|title-link=pmc or |title-link=doi) for auto-linking or to disable the feature (|title-link=none).

It is not necessary to specify a URL to a link identical to a link also produced by an identifier. The |url= parameter (or |title-link=) can then be used for providing a direct deep link to the corresponding document or a convenience link to a resource that would not otherwise be obviously accessible.

Subscription or registration required

Citations of online sources that require registration or a subscription are acceptable in Wikipedia as documented in Verifiability § Access to sources. As a courtesy to readers and other editors, editors should signal restrictions on access to material provided via the external links included in a citation. These levels describe requirements or constraints related to accessing and viewing the cited material; they are not intended to indicate the ability to reuse, or the copyright status, of the material, since that status is not relevant to verifying claims in articles.

Four access levels can be used:

• access indicator for named identifiers:
  • free: the source is free to read for anyone
• access indicators for url-holding parameters:
  • registration: a free registration with the provider is required to access the source, even if a limited preview, abstract or review may still be available without registration
  • limited: free access is subject to limited trial and a subscription is normally required
  • subscription: the source is only accessible via a paid subscription with the provider of the source ("paywall")

As there are often multiple external links with different access levels in the same citation, each value is attributed to a specific external link.

Access indicators for url-holding parameters

See also: WP:CONLINK

Online sources linked by |url=, |article-url=, |chapter-url=, |contribution-url=, |entry-url=, |map-url=, and |section-url= are presumed to be free-to-read. When they are not free-to-read, editors should mark those sources with the matching access-indicator parameter so that an appropriate icon is included in the rendered citation. Because the sources linked by these URL-holding parameters are presumed to be free-to-read, they are not marked as free. If the registration/limited/subscription access to the source goes dead and is no longer available, then remove the access-indicator parameter and add |archive-url= and |archive-date= values if possible.

URL-holding and access-indicator parameters

URL	Access	Allowed keywords
|url=	|url-access=	registration limited subscription
|article-url=	|article-url-access=
|chapter-url=	|chapter-url-access=
|contribution-url=	|contribution-url-access=
|entry-url=	|entry-url-access=
|map-url=	|map-url-access=
|section-url=	|section-url-access=

For example, this cites a web page that requires registration but not subscription:

{{cite web |url=https://example.com/nifty_data.php |url-access=registration |date=2021-04-15 |title=Nifty example data}}

which renders as:

"Nifty example data". 2021-04-15.

Access indicator for named identifiers

Links inserted by named identifiers are presumed to lie behind a paywall or registration barrier – exceptions listed below. When they are free-to-read, editors should mark those sources with the matching access-indicator parameter so that an appropriate icon is included in the rendered citation.

To be clear, these should be flagged when the databases themselves host the free document, not merely a link to another database that hosts them. For example, the following citation has 3 identifiers a DOI, a PMCID, and a PMID.

• Velmovitsky, Pedro Elkind; Kirolos, Merna; Alencar, Paulo; Leatherdale, Scott; Cowan, Donald; Morita, Plinio Pelegrini (2024). "Leveraging mHealth Technologies for Public Health". JMIR Public Health and Surveillance. 10 e49719. doi:10.2196/49719. PMC 11427850. PMID 39265164.

Clicking on the DOI takes you to a page where the full paper is freely accessible, so flagging with |doi-access=free is appropriated. The PMCID link also takes you to a page where the full paper is freely accessible, and is likewise automatically flagged as free, as virtually all PMCID links are free. The PMID link, however, only takes you to a page that contains links to free versions of the paper (the DOI link and the PMCID link), but does not host a free version itself. Therefore it is not flagged as free.

Named-identifier and access-indicator parameters

Identifier	Access	Allowed keywords
|bibcode=	|bibcode-access=	free
|doi=	|doi-access=
|hdl=	|hdl-access=
|jstor=	|jstor-access=
|ol=	|ol-access=
|osti=	|osti-access=
|ssrn=	|ssrn-access=
|s2cid=	|s2cid-access=

Some named-identifiers are always free-to-read. For those named identifiers there are no access-indicator parameters; the access level is automatically indicated by the template. These named identifiers are:

• |arxiv=
• |biorxiv=
• |citeseerx=
• |medrxiv=
• |pmc=
• |rfc=

For an embargoed pmc that will become available in the future, see pmc-embargo-date.

When the sources linked by these named-identifier parameters are not presumed to carry a free-to-read full text (for instance because they're just abstracting services, host paywalled reviews, or give only basic information about the source), they may not be marked as limited, registration, or subscription. Those named identifiers are

• |asin=/|asin-tld=
• |issn=/|e-issn=
• |isbn=
• |ismn=
• |jfm=
• |lccn=
• |mr=
• |oclc=
• |pmid=
• |sbn=
• |zbl=

Tracking of free DOIs

• The template is able to recognize known free-to-read DOI registrants, based on a list in Module:Citation/CS1/Configuration. Once a free registrant is identified, the 10.xxxx/... part of the DOI associated with the registrant can be added to the list under local function build_free_doi_registrants_table(). If |doi-access=free is not set, it will place the page in Category:CS1 maint: unflagged free DOI, which is routinely cleared by User:Citation bot.
• The template is also able to recognize known free-to-read journals, assuming they have a clear 10.xxxx/yyyy.... DOI pattern. Once that pattern is identified, it can be added to Module:Citation/CS1/Configuration under local extended_registrants_t = { with the format ['XXXX'] = {'YYYY'},. If there are multiple journals with the same DOI prefix, they can be grouped together with the format ['XXXX'] = {'YYYY', 'ZZZZ', '...'},.
• If you add a free registrant/free journal to the lists in Module:Citation/CS1/Configuration, leave a note at User talk:Citation bot so the bot knows about it.

Quote

• quote: Relevant text quoted from the source. Displays enclosed in quotes. When supplied, the citation terminator (a period by default) is suppressed, so the quote must include terminating punctuation. If script-quote is defined, use quote to hold a Romanization (if available) of the text in script-quote. When quoting a copyrighted text, only brief quotations to attribute a point of view or idea are permitted; extensive quotations are prohibited.
  • script-quote: Original quotation for languages that do not use a Latin-based script (Arabic, Chinese, Cyrillic, Greek, Hebrew, Japanese, Korean, etc.); not italicized, follows italicized Romanization defined in quote (if available). Alias: none. Must be prefixed with one of the supported language codes to help browsers properly display the script:

    ... |quote=Tōkyō tawā |script-quote=ja:東京タワー |trans-quote=Tokyo Tower ...

  • trans-quote: English translation of the quotation if the source quoted is in a foreign language. Displays in square brackets. Alias: none.

Anchor

• ref: the citation's HTML anchor identifier, when different from its default. When set, |ref=ID generates an anchor with the given ID (the id= attribute in the citation's <cite id="ID"> HTML tag). Setting |ref=ID identifies the template as a target and allows wikilinking to full references, especially useful with short-form citations like shortened notes and parenthetical referencing. The default anchor ID is suitable for use with {{sfn}} and {{harv}} templates. Since April 2020, the parameter / keyword pair |ref=harv has no special meaning; this deprecated setting should not be used and may be removed from existing cs1|2 templates. To inhibit anchor ID creation, set |ref=none. Aliases: none. See Template:Citation/doc § Anchors for Harvard referencing templates.

Display options

• mode: Sets element separator, default terminal punctuation, and certain capitalization according to the value provided. For |mode=cs1, element separator and terminal punctuation is a period (.); where appropriate, initial letters of certain words are capitalized ('Retrieved...'). For |mode=cs2, element separator is a comma (,); terminal punctuation is omitted; where appropriate, initial letters of certain words are not capitalized ('retrieved...'). These styles correspond to Citation Style 1 and Citation Style 2 respectively. To override default terminal punctuation use postscript.
• author-mask:
• contributor-mask:
• editor-mask:
• interviewer-mask:
• subject-mask:
• translator-mask:

  Replaces the name of the (first) author with em dashes or text. Set <name>-mask to a numeric value n to set the dash n em spaces wide; set <name>-mask to a text value to display the text without a trailing author separator; for example, "with". The numeric value 0 is a special case to be used in conjunction with <name>-link—in this case, the value of <name>-link will be used as (linked) text. In either case, you must still include the values for all names for metadata purposes. Primarily intended for use with bibliographies or bibliography styles where multiple works by a single author are listed sequentially such as shortened footnotes. Do not use in a list generated by {{reflist}}, <references /> or similar as there is no control of the order in which references are displayed. Mask parameters can take an enumerator in the name of the parameter (e.g. |authorn-mask=) to apply the mask to a specific name.

• display-authors:
• display-contributors:
• display-editors:
• display-interviewers:
• display-subjects:
• display-translators:

  Controls the number of author (or other kind of contributor) names that are displayed. By default, all authors are displayed. To change the displayed number of names, set the parameter to the desired number. For example, |display-authors=2 will display only the first two authors in a citation (and not affect the display of the other kinds of contributors). |display-authors=0 is a special case suppressing the display of all authors including the et al. |display-authors=etal displays all authors in the list followed by et al. Aliases: none.

• postscript: Controls the closing punctuation for a citation; defaults to a period (.); for no terminating punctuation, specify |postscript=none – leaving |postscript= empty is the same as omitting it, but is ambiguous. Additional text, or templates that render more than a single terminating punctuation character, will generate a maintenance message. |postscript= is ignored if quote is defined.

TemplateData

This is the TemplateData for this template used by TemplateWizard, VisualEditor and other tools. See a monthly parameter usage report for Template:Cite episode in articles based on its TemplateData.

TemplateData for Cite episode

Template:Cite episode uses unique and standard parameter sets; TemplateData has errors:

• |last= has duplicate aliases: |author-last=

This template formats citations for television or radio programs and episodes.

Template parameters

This template has custom formatting.

Parameter		Description	Type	Status
Episode title	title	Title of the episode	String	suggested
Episode article in Wikipedia.	episode-link	Wikilink to an existing Wikipedia article for this one episode.	Page name	suggested
URL	url URL	The URL of the online location where the text of the publication can be found	URL	optional
Series	series	The name of the series the episode belongs to.	String	required
Series article in Wikipedia.	series-link	Wikilink to an existing Wikipedia article for this series.	Page name	suggested
Last name	last last1 author author1 author1-last author-last surname1 author-last1 subject1 surname author-last subject	The surname of the author; don't wikilink, use 'author-link'; can suffix with a numeral to add additional authors	String	optional
First name	first given author-first first1 given1 author-first1 author1-first	Given or first name, middle names, or initials of the author; don't wikilink, use 'author-link'; can suffix with a numeral to add additional authors	String	optional
Author link	author-link subject-link author-link1 author1-link subject-link1 subject1-link	Title of existing Wikipedia article about the author; can suffix with a numeral to add additional authors	Page name	optional
Last name 2	last2 author2	The surname of the second author; don't wikilink, use 'author-link2'.	Unknown	optional
First name 2	first2	Given or first name, middle names, or initials of the second author; don't wikilink.	Unknown	optional
Author link 2	author-link2 author2-link	Title of existing Wikipedia article about the second author.	Page name	optional
Network	network	The network the episode was aired on.	String	suggested
Station	station	Call letters of the local station (if any).	String	optional
Source date	date airdate	Full date when the source was published; if unknown, use access-date instead; do not wikilink	String	suggested
Year of publication	year	Year when the source was published, if the full date is not available	String	optional
Season number	season	Season number, usually for US shows.	Number	suggested
Series number	series-no series-number	Series number, usually for British shows.	Number	optional
Episode number	number	Many episodic shows are identified by separate season and episode numbers. Alternately, some shows prefer the format of a single episode number that includes the season within it; this format can be used by omitting the season field.	String	suggested
Minutes into episode.	minutes	Time the event occurs in the source. When rendered, followed by "minutes in".	String	optional
Time within episode.	time	Alternate to minutes. Time the event occurs in the source. When rendered, preceded by default text "Event occurs at time".	String	optional
Transcript	transcript	Transcript of the original source.	String	optional
Transcript URL	transcript-url	URL of the transcript.	URL	optional
Quote	quote	Relevant text quoted from the source; displays last, enclosed in quotes; must include terminating punctuation	String	optional
Translated title	trans-title	An English language title, if the source cited is in a foreign language; 'language' is recommended	String	optional
Translated quote	trans-quote	English translation of the quotation if the source quoted is in a foreign language. Displays in square brackets.	String	optional
Via	via	Name of the content deliverer, if different from publisher Example YouTube	String	optional
Language	language	The language in which the source is written, if not English; use the full language name; do not use icons or templates	String	optional
URL access date	access-date	The full date when the original URL was accessed; do not wikilink	String	optional
URL status	url-status	The status of the URL- live, dead, usurped/unfit (inappropriate content) or deviated (different content) Suggested values dead live usurped unfit deviated	String	optional
Archive URL	archive-url	The URL of an archived copy of a web page, if or in case the URL becomes unavailable; requires 'archive-date'	URL	optional
Archive date	archive-date	Date when the original URL was archived; preceded by default text "archived from the original on". Use the same format as other access and archive dates in the citations.	Date	optional

See also

Template:Cite episode invokes Module:Navbox using Lua.

Usage

This template can be used to make a standard navigation box. It is intended for use within another template that standardises the title and contents of the box (see Template:ShipNavbox). This template SHOULD NOT be used directly within articles, as it creates a maintenance burden to do so whenever the contents of the box have to be updated.

The purpose of this template is to standardise the attributes of all navigation boxes, for example, their colours and other CSS attributes. The template is fairly simple, and could be extended to add other features in the future. Using this template allows changes to be implemented much quicker and easier than editing each template separately.

Syntax

{{navbox
|state      = uncollapsed, collapsed, plain, autocollapse (default)
|name       = mandatory - name of the template
|style      = optional - style for the whole table
|title      = mandatory - navbox header
|gtitleN    = optional - title of N-th group of items
|styleN     = optional - style for groupN; i.e. text-align
|groupN     = mandatory - list of groups of items
|fstyle     = optional - style for footer ; i.e. text-align
|footer     = optional - navbox footer
}}

• Groups: Currently there is no technical limit to the maximum number of groups.
  • Groups of items can be added as parameters: group1, group2, group3, ... up to groupN.
• Group title: Each group has its own title parameter: gtitle1, gtitle2, gtitle3, ... up to gtitleN. Note that the default width for the first column is 15%.
• Group style: Style may also be customised to each group in: style1, style2, style3, ... up to styleN.
  • Note that neither the title nor the items have any wiki-links built into the template. As a result, users of the template are free to use wiki-links as they wish.
• Line breaks: Line-breaks (<br />) are unnecessary, as text wrapping is done automatically by the template. This also includes links and text in gtitleN and groupN.
• Bullets: Create unordered lists with lines beginning with *.
• Pipe links: Because of the nature of template syntax, it may be necessary to use Template:! ({{!}}).

States

• Autocollapse: By default, the state of a navbox is "autocollapsed". This means that if the number of navboxes in a page exceeds the maximum allocation of the collapsible navboxes, then the remaining navboxes are collapsed automatically. For more information (or to change the setting), see MediaWiki:Common.js.
  • Currently, the autocollapse allocation is 2 (see MediaWiki:Common.js). This means that if there are 3 navboxes in a page, the third and subsequent navboxes will be collapsed automatically.
• Uncollapsed: Forces the navbox to be displayed.
  • All of the navboxes in this documentation are in the uncollapsed state.
• Collapsed: The reverse of uncollapsed. Forces the navbox to be hidden instead.
  • Navboxes with a height of more than 300 pixels will also be collapsed automatically. For more information (or to change the setting), see MediaWiki:Common.js.
• Plain: Removes the "show/hide" link.

Sub-groups

• For larger navboxes, it may be necessary to include sub-groups within a particular group of items. It is also possible to collapsible navboxes within the parent navbox, see Collapsible sub-groups.
• To create sub-groups within {{navbox}}, certain parameters are to be included:
  • The parent navbox group (i.e. group2 in the example below) requires the type parameter (gtype2 = Subgroup).
  • The nested navbox (sub-group) requires the inclusion of the sub-group parameter (subgroup = yes). This enables the template to differentiate between the sub-group and the parent navbox.

{{navbox
|name    =
|title   =
|gtitle1 =
|group1  =
|gtitle2 =  
|gtype2  = Subgroup (mandatory)
|group2  = 
  {{navbox
  |subgroup = yes (mandatory)
  |gtitle1  = 
  |group1   =
  |gtitle2  = 
  |group2   = 
  }}
}}

Collapsible sub-groups

• For extremely long navboxes, it is recommended to use collapsible navboxes within the parent navbox. Further sub-groups can then be added to these collapsible navboxes.
• To create collapsible sub-groups within {{navbox}}, these parameters need to be included:
  • The parent navbox is almost always uncollapsed (state=uncollapsed).
  • The parent navbox group (i.e. group1 in the example below) requires the type parameter (gtype1 = Subgroup).
  • The nested collapsible navbox requires the inclusion of the collapsible parameter (collapsible = yes). This enables the template to differentiate between the collapsible navbox and the parent navbox.
  • The nested collapsible navbox is forcefully collapsed (state=collapsed).

{{navbox
|state  = uncollapsed
|name   = 
|gtype1 = Subgroup
|group1 = 
  {{navbox
  |collapsible = yes
  |state   = collapsed
  |title   = 
  |gtitle1 = 
  |group1  = 
  |gtitle2 = 
  |group2  = 
  }}
}}

Use of images

• The use of images in navboxes is permitted, but please resize the images to keep them small. Inventory-sized images (25-30 pixels) are recommended.
• Please use {{t|plink}} to create links with images. Use {{t|plink}} for any case where text is not desired after the link. It functions the same as {{t|plink}}, but it does not produce a wikilink in text. Use {{t|chatl}} to link chatheads. These templates create links for both the image and text (except for {{t|plink}}) using far less wikicode than the standard syntax.

Link and file share the same name

{{plink|Item}}

File name differs from the link

{{plink|Item|File}}

Link and file share the same name, but different text is desired to display

{{plink|Item|alt=Text}}

File name differs from the link and different text is desired to display

{{plink|Item|File|alt=Text}}

Categorising

Navboxes are very useful for transcluding categories onto a large number of pages that share both a trait and the navigation box. For example: Template:ShipNavbox transcludes Category:Ships onto every page that uses it.

There are 2 methods of categorising pages with navboxes:

The first way is with {{t|Ctg}}. This is the preferred method, and can be used in most cases. The rules and operations for the Category handler template are very simple; however, they are enough to produce the desired results on most pages.

Categorisation should only be used on a template for large-scale addition. It is unhelpful, for example, to use a rule that only applies to 1 page.

Examples

To see the following navboxes in action, see Template:Navbox.

Single line navbox with centered list

{{navbox
|name    = 
|title   = 
|style1  = text-align:center
|group1  =
}}

Navbox with standard footer

{{navbox
|name    = 
|title   = 
|gtitle1 = 
|group1  = 
|footer  = Centered footer
}}

Navbox with styled footer

{{navbox
|name    = 
|title   = 
|gtitle1 = 
|group1  = 
|fstyle  = text-align:right
|footer  = Right-aligned footer
}}

Multiple line navbox

{{navbox
|name    = 
|title   = 
|gtitle1 = Group title 1
|group1  = 
|gtitle2 = Group title 2
|group2  = 
|gtitle3 = Group title 3
|group3  = 
}}

Collapsed navbox

{{navbox
|state   = collapsed
|name    = 
|title   = 
|style1  = text-align:center
|group1  = 
}}

Plain navbox with Tnavbar

{{navbox
|state   = plain
|name    = 
|title   = 
|style1  = text-align:center
|group1  = 
}}

Plain navbox without Tnavbar

{{navbox
|state   = plain
|title   = 
|style1  = text-align:center
|group1  = 
}}

Complicated navbox

{{navbox
|state   = uncollapsed
|name    = 
|title   = 
|gtitle1 = Level 1 Title 1
|group1  = 
|gtitle2 = Level 1 Title 2
|group2  = 
|gtitle3 = Level 1 Title 3
|group3  = 
|gtitle4 = Level 1 Title 4
|group4  = 
|gtitle5 = Level 1 Title 5
|gtype5  = Subgroup
|group5  = 
  {{navbox
  |subgroup = Yes
  |gtitle1  = Level 2 Title 1
  |group1   =
  |gtitle2  = Level 2 Title 2
  |group2   =
  |gtitle3  = Level 2 Title 3
  |gtype3   = Subgroup
  |group3   = 
    {{navbox
    |subgroup = Yes
    |gtitle1  = Level 3 Title 1
    |group1   =
    |gtitle2  = Level 3 Title 2
    |group2   =
    }}
  |gtitle4  = Level 2 Title 4
  |group4   = 
  }}
|gtitle6 = Level 1 Title 6
|group6  = 
|gtitle7 = Level 1 Title 7
|group7  = 
|fstyle  = 
|footer  = 
}}

Preventing unwanted documentation

The Navbox template's documentation is automatically transcluded under the navbox on any Template namespace page. It is not transcluded when used as a sub-group or collapsible sub-group template (subgroup= yes or collapsible=yes).

Should the documentation appear when it is unwanted, it can be hidden by setting the doc parameter doc=no on the template. In most cases, the doc parameter is NOT used and the parameter is removed completely.

Template:Cite episode invokes Module:Navbox using Lua.

Usage

This template can be used to make a standard navigation box. It is intended for use within another template that standardises the title and contents of the box (see Template:ShipNavbox). This template SHOULD NOT be used directly within articles, as it creates a maintenance burden to do so whenever the contents of the box have to be updated.

The purpose of this template is to standardise the attributes of all navigation boxes, for example, their colours and other CSS attributes. The template is fairly simple, and could be extended to add other features in the future. Using this template allows changes to be implemented much quicker and easier than editing each template separately.

Syntax

{{navbox
|state      = uncollapsed, collapsed, plain, autocollapse (default)
|name       = mandatory - name of the template
|style      = optional - style for the whole table
|title      = mandatory - navbox header
|gtitleN    = optional - title of N-th group of items
|styleN     = optional - style for groupN; i.e. text-align
|groupN     = mandatory - list of groups of items
|fstyle     = optional - style for footer ; i.e. text-align
|footer     = optional - navbox footer
}}

• Groups: Currently there is no technical limit to the maximum number of groups.
  • Groups of items can be added as parameters: group1, group2, group3, ... up to groupN.
• Group title: Each group has its own title parameter: gtitle1, gtitle2, gtitle3, ... up to gtitleN. Note that the default width for the first column is 15%.
• Group style: Style may also be customised to each group in: style1, style2, style3, ... up to styleN.
  • Note that neither the title nor the items have any wiki-links built into the template. As a result, users of the template are free to use wiki-links as they wish.
• Line breaks: Line-breaks (<br />) are unnecessary, as text wrapping is done automatically by the template. This also includes links and text in gtitleN and groupN.
• Bullets: Create unordered lists with lines beginning with *.
• Pipe links: Because of the nature of template syntax, it may be necessary to use Template:! ({{!}}).

States

• Autocollapse: By default, the state of a navbox is "autocollapsed". This means that if the number of navboxes in a page exceeds the maximum allocation of the collapsible navboxes, then the remaining navboxes are collapsed automatically. For more information (or to change the setting), see MediaWiki:Common.js.
  • Currently, the autocollapse allocation is 2 (see MediaWiki:Common.js). This means that if there are 3 navboxes in a page, the third and subsequent navboxes will be collapsed automatically.
• Uncollapsed: Forces the navbox to be displayed.
  • All of the navboxes in this documentation are in the uncollapsed state.
• Collapsed: The reverse of uncollapsed. Forces the navbox to be hidden instead.
  • Navboxes with a height of more than 300 pixels will also be collapsed automatically. For more information (or to change the setting), see MediaWiki:Common.js.
• Plain: Removes the "show/hide" link.

Sub-groups

• For larger navboxes, it may be necessary to include sub-groups within a particular group of items. It is also possible to collapsible navboxes within the parent navbox, see Collapsible sub-groups.
• To create sub-groups within {{navbox}}, certain parameters are to be included:
  • The parent navbox group (i.e. group2 in the example below) requires the type parameter (gtype2 = Subgroup).
  • The nested navbox (sub-group) requires the inclusion of the sub-group parameter (subgroup = yes). This enables the template to differentiate between the sub-group and the parent navbox.

{{navbox
|name    =
|title   =
|gtitle1 =
|group1  =
|gtitle2 =  
|gtype2  = Subgroup (mandatory)
|group2  = 
  {{navbox
  |subgroup = yes (mandatory)
  |gtitle1  = 
  |group1   =
  |gtitle2  = 
  |group2   = 
  }}
}}

Collapsible sub-groups

• For extremely long navboxes, it is recommended to use collapsible navboxes within the parent navbox. Further sub-groups can then be added to these collapsible navboxes.
• To create collapsible sub-groups within {{navbox}}, these parameters need to be included:
  • The parent navbox is almost always uncollapsed (state=uncollapsed).
  • The parent navbox group (i.e. group1 in the example below) requires the type parameter (gtype1 = Subgroup).
  • The nested collapsible navbox requires the inclusion of the collapsible parameter (collapsible = yes). This enables the template to differentiate between the collapsible navbox and the parent navbox.
  • The nested collapsible navbox is forcefully collapsed (state=collapsed).

{{navbox
|state  = uncollapsed
|name   = 
|gtype1 = Subgroup
|group1 = 
  {{navbox
  |collapsible = yes
  |state   = collapsed
  |title   = 
  |gtitle1 = 
  |group1  = 
  |gtitle2 = 
  |group2  = 
  }}
}}

Use of images

• The use of images in navboxes is permitted, but please resize the images to keep them small. Inventory-sized images (25-30 pixels) are recommended.
• Please use {{t|plink}} to create links with images. Use {{t|plink}} for any case where text is not desired after the link. It functions the same as {{t|plink}}, but it does not produce a wikilink in text. Use {{t|chatl}} to link chatheads. These templates create links for both the image and text (except for {{t|plink}}) using far less wikicode than the standard syntax.

Link and file share the same name

{{plink|Item}}

File name differs from the link

{{plink|Item|File}}

Link and file share the same name, but different text is desired to display

{{plink|Item|alt=Text}}

File name differs from the link and different text is desired to display

{{plink|Item|File|alt=Text}}

Categorising

Navboxes are very useful for transcluding categories onto a large number of pages that share both a trait and the navigation box. For example: Template:ShipNavbox transcludes Category:Ships onto every page that uses it.

There are 2 methods of categorising pages with navboxes:

The first way is with {{t|Ctg}}. This is the preferred method, and can be used in most cases. The rules and operations for the Category handler template are very simple; however, they are enough to produce the desired results on most pages.

Categorisation should only be used on a template for large-scale addition. It is unhelpful, for example, to use a rule that only applies to 1 page.

Examples

To see the following navboxes in action, see Template:Navbox.

Single line navbox with centered list

{{navbox
|name    = 
|title   = 
|style1  = text-align:center
|group1  =
}}

Navbox with standard footer

{{navbox
|name    = 
|title   = 
|gtitle1 = 
|group1  = 
|footer  = Centered footer
}}

Navbox with styled footer

{{navbox
|name    = 
|title   = 
|gtitle1 = 
|group1  = 
|fstyle  = text-align:right
|footer  = Right-aligned footer
}}

Multiple line navbox

{{navbox
|name    = 
|title   = 
|gtitle1 = Group title 1
|group1  = 
|gtitle2 = Group title 2
|group2  = 
|gtitle3 = Group title 3
|group3  = 
}}

Collapsed navbox

{{navbox
|state   = collapsed
|name    = 
|title   = 
|style1  = text-align:center
|group1  = 
}}

Plain navbox with Tnavbar

{{navbox
|state   = plain
|name    = 
|title   = 
|style1  = text-align:center
|group1  = 
}}

Plain navbox without Tnavbar

{{navbox
|state   = plain
|title   = 
|style1  = text-align:center
|group1  = 
}}

Complicated navbox

{{navbox
|state   = uncollapsed
|name    = 
|title   = 
|gtitle1 = Level 1 Title 1
|group1  = 
|gtitle2 = Level 1 Title 2
|group2  = 
|gtitle3 = Level 1 Title 3
|group3  = 
|gtitle4 = Level 1 Title 4
|group4  = 
|gtitle5 = Level 1 Title 5
|gtype5  = Subgroup
|group5  = 
  {{navbox
  |subgroup = Yes
  |gtitle1  = Level 2 Title 1
  |group1   =
  |gtitle2  = Level 2 Title 2
  |group2   =
  |gtitle3  = Level 2 Title 3
  |gtype3   = Subgroup
  |group3   = 
    {{navbox
    |subgroup = Yes
    |gtitle1  = Level 3 Title 1
    |group1   =
    |gtitle2  = Level 3 Title 2
    |group2   =
    }}
  |gtitle4  = Level 2 Title 4
  |group4   = 
  }}
|gtitle6 = Level 1 Title 6
|group6  = 
|gtitle7 = Level 1 Title 7
|group7  = 
|fstyle  = 
|footer  = 
}}

Preventing unwanted documentation

The Navbox template's documentation is automatically transcluded under the navbox on any Template namespace page. It is not transcluded when used as a sub-group or collapsible sub-group template (subgroup= yes or collapsible=yes).

Should the documentation appear when it is unwanted, it can be hidden by setting the doc parameter doc=no on the template. In most cases, the doc parameter is NOT used and the parameter is removed completely.

This template produces COinS metadata; see COinS in Wikipedia for background information.