Template:To

To editor Example:

Template documentation follows
Note: the template above may sometimes be partially or fully invisible.
Visit "Template:To/doc" to edit its documentation if it is available. (How does this work?)

This template is used on approximately 3,000 pages and changes may be widely noticed. Test changes in the template's /sandbox or /testcases subpages, or in your own user subpage. Consider discussing changes on the talk page before implementing them.

Usage

This template takes advantage of the user mention notification to ping the user(s) you are replying to in a discussion (so you don't have to use the {{talkback}} template). It works on any talk page or Wikipedia namespace page.

This template is particularly helpful in discussions that are not threaded, to indicate which user's comment is referenced. If you feel that this template unnecessarily personalizes the discussion, you may still use the {{talkback}} template on the user's talk page to indicate that you have replied to a comment.

Note that it isn't necessary to use this template to ping (indicate) the user if you are already linking to their username from your post.

Single recipient

To use it, just add something like the following to an existing discussion:

{{to|User1}} Message text. ~~~~

For example, ":{{to|Jimbo Wales}} Message text." displays as:

To editor Jimbo Wales: Message text.

The comment must be signed and belong to a section in order for the notification to work.

Multiple recipients

You can reply to up to 7 people at once:

{{to|User1|UserII|UserC}} Message text. ~~~~

Specify a nickname

You can display any text in place of a username by using |labelX= or |sX=, where X is the index of a positional parameter, counting from 1. For example:

{{to|Example|label1=Exemplar|Example2|label2=John}} produces To editors Exemplar and John:
{{to|Example|s1=Examp|Example2|s2=Jack}} produces To editors Examp and Jack:

Tip! – by default, the very first letter after the |labelx= parameter is in uppercase, as in |label1=exemplar, which produces To editor Exemplar:. A trick that uses one soft hyphen, between the equal sign and the first letter, as in |label1=exemplar will make the first letter lowercase if needed, as in To editor exemplar:. The soft hyphen is invisible and yet it can be copied and pasted. So here it is for you to copy and paste: =e (between the equal sign and letter "e"). It's easiest to copy the "=e" in the previous sentence, paste it where you want the soft hyphen to go, and then carefully erase just the "e" and the equal sign separately, which will leave the soft hyphen behind.

Customize punctuation

By default, the template will insert a colon after the final name. To change this, specify the required character using the |p= parameter. For example:

{{to|Example|p=---}} produces To editor Example---
{{to|Example|p=}} produces To editor Example

Related templates

{{reply to}} – Uses an "@" sign at the beginning instead of "To "
{{user link}} – Links to a single user's page (without the "To" or the @ sign, and without a colon)
{{no ping}} – Links a user's name without triggering the echo notification system

Template:To invokes Module:Navbox using Lua.

Usage

This template can be used to make a standard navigation box. It is intended for use within another template that standardises the title and contents of the box (see Template:ShipNavbox). This template SHOULD NOT be used directly within articles, as it creates a maintenance burden to do so whenever the contents of the box have to be updated.

The purpose of this template is to standardise the attributes of all navigation boxes, for example, their colours and other CSS attributes. The template is fairly simple, and could be extended to add other features in the future. Using this template allows changes to be implemented much quicker and easier than editing each template separately.

Syntax

{{navbox
|state      = uncollapsed, collapsed, plain, autocollapse (default)
|name       = mandatory - name of the template
|style      = optional - style for the whole table
|title      = mandatory - navbox header
|gtitleN    = optional - title of N-th group of items
|styleN     = optional - style for groupN; i.e. text-align
|groupN     = mandatory - list of groups of items
|fstyle     = optional - style for footer ; i.e. text-align
|footer     = optional - navbox footer
}}

Groups: Currently there is no technical limit to the maximum number of groups.
- Groups of items can be added as parameters: group1, group2, group3, ... up to groupN.
Group title: Each group has its own title parameter: gtitle1, gtitle2, gtitle3, ... up to gtitleN. Note that the default width for the first column is 15%.
Group style: Style may also be customised to each group in: style1, style2, style3, ... up to styleN.
- Note that neither the title nor the items have any wiki-links built into the template. As a result, users of the template are free to use wiki-links as they wish.
Line breaks: Line-breaks (<br />) are unnecessary, as text wrapping is done automatically by the template. This also includes links and text in gtitleN and groupN.
Bullets: Create unordered lists with lines beginning with *.
Pipe links: Because of the nature of template syntax, it may be necessary to use Template:! ({{!}}).

States

Autocollapse: By default, the state of a navbox is "autocollapsed". This means that if the number of navboxes in a page exceeds the maximum allocation of the collapsible navboxes, then the remaining navboxes are collapsed automatically. For more information (or to change the setting), see MediaWiki:Common.js.
- Currently, the autocollapse allocation is 2 (see MediaWiki:Common.js). This means that if there are 3 navboxes in a page, the third and subsequent navboxes will be collapsed automatically.
Uncollapsed: Forces the navbox to be displayed.
- All of the navboxes in this documentation are in the uncollapsed state.
Collapsed: The reverse of uncollapsed. Forces the navbox to be hidden instead.
- Navboxes with a height of more than 300 pixels will also be collapsed automatically. For more information (or to change the setting), see MediaWiki:Common.js.
Plain: Removes the "show/hide" link.

Sub-groups

For larger navboxes, it may be necessary to include sub-groups within a particular group of items. It is also possible to collapsible navboxes within the parent navbox, see Collapsible sub-groups.
To create sub-groups within {{navbox}}, certain parameters are to be included:
- The parent navbox group (i.e. group2 in the example below) requires the type parameter (gtype2 = Subgroup).
- The nested navbox (sub-group) requires the inclusion of the sub-group parameter (subgroup = yes). This enables the template to differentiate between the sub-group and the parent navbox.

{{navbox
|name    =
|title   =
|gtitle1 =
|group1  =
|gtitle2 =  
|gtype2  = Subgroup (mandatory)
|group2  = 
  {{navbox
  |subgroup = yes (mandatory)
  |gtitle1  = 
  |group1   =
  |gtitle2  = 
  |group2   = 
  }}
}}

Collapsible sub-groups

For extremely long navboxes, it is recommended to use collapsible navboxes within the parent navbox. Further sub-groups can then be added to these collapsible navboxes.
To create collapsible sub-groups within {{navbox}}, these parameters need to be included:
- The parent navbox is almost always uncollapsed (state=uncollapsed).
- The parent navbox group (i.e. group1 in the example below) requires the type parameter (gtype1 = Subgroup).
- The nested collapsible navbox requires the inclusion of the collapsible parameter (collapsible = yes). This enables the template to differentiate between the collapsible navbox and the parent navbox.
- The nested collapsible navbox is forcefully collapsed (state=collapsed).

{{navbox
|state  = uncollapsed
|name   = 
|gtype1 = Subgroup
|group1 = 
  {{navbox
  |collapsible = yes
  |state   = collapsed
  |title   = 
  |gtitle1 = 
  |group1  = 
  |gtitle2 = 
  |group2  = 
  }}
}}

Use of images

The use of images in navboxes is permitted, but please resize the images to keep them small. Inventory-sized images (25-30 pixels) are recommended.
Please use {{t|plink}} to create links with images. Use {{t|plink}} for any case where text is not desired after the link. It functions the same as {{t|plink}}, but it does not produce a wikilink in text. Use {{t|chatl}} to link chatheads. These templates create links for both the image and text (except for {{t|plink}}) using far less wikicode than the standard syntax.

Link and file share the same name

{{plink|Item}}

File name differs from the link

{{plink|Item|File}}

Link and file share the same name, but different text is desired to display

{{plink|Item|alt=Text}}

File name differs from the link and different text is desired to display

{{plink|Item|File|alt=Text}}

Categorising

Navboxes are very useful for transcluding categories onto a large number of pages that share both a trait and the navigation box. For example: Template:ShipNavbox transcludes Category:Ships onto every page that uses it.

There are 2 methods of categorising pages with navboxes:

The first way is with {{t|Ctg}}. This is the preferred method, and can be used in most cases. The rules and operations for the Category handler template are very simple; however, they are enough to produce the desired results on most pages.

Categorisation should only be used on a template for large-scale addition. It is unhelpful, for example, to use a rule that only applies to 1 page.

Examples

To see the following navboxes in action, see Template:Navbox.

Single line navbox with centered list

{{navbox
|name    = 
|title   = 
|style1  = text-align:center
|group1  =
}}

Navbox with standard footer

{{navbox
|name    = 
|title   = 
|gtitle1 = 
|group1  = 
|footer  = Centered footer
}}

Navbox with styled footer

{{navbox
|name    = 
|title   = 
|gtitle1 = 
|group1  = 
|fstyle  = text-align:right
|footer  = Right-aligned footer
}}

Multiple line navbox

{{navbox
|name    = 
|title   = 
|gtitle1 = Group title 1
|group1  = 
|gtitle2 = Group title 2
|group2  = 
|gtitle3 = Group title 3
|group3  = 
}}

Collapsed navbox

{{navbox
|state   = collapsed
|name    = 
|title   = 
|style1  = text-align:center
|group1  = 
}}

Plain navbox with Tnavbar

{{navbox
|state   = plain
|name    = 
|title   = 
|style1  = text-align:center
|group1  = 
}}

Plain navbox without Tnavbar

{{navbox
|state   = plain
|title   = 
|style1  = text-align:center
|group1  = 
}}

Complicated navbox

{{navbox
|state   = uncollapsed
|name    = 
|title   = 
|gtitle1 = Level 1 Title 1
|group1  = 
|gtitle2 = Level 1 Title 2
|group2  = 
|gtitle3 = Level 1 Title 3
|group3  = 
|gtitle4 = Level 1 Title 4
|group4  = 
|gtitle5 = Level 1 Title 5
|gtype5  = Subgroup
|group5  = 
  {{navbox
  |subgroup = Yes
  |gtitle1  = Level 2 Title 1
  |group1   =
  |gtitle2  = Level 2 Title 2
  |group2   =
  |gtitle3  = Level 2 Title 3
  |gtype3   = Subgroup
  |group3   = 
    {{navbox
    |subgroup = Yes
    |gtitle1  = Level 3 Title 1
    |group1   =
    |gtitle2  = Level 3 Title 2
    |group2   =
    }}
  |gtitle4  = Level 2 Title 4
  |group4   = 
  }}
|gtitle6 = Level 1 Title 6
|group6  = 
|gtitle7 = Level 1 Title 7
|group7  = 
|fstyle  = 
|footer  = 
}}

Preventing unwanted documentation

The Navbox template's documentation is automatically transcluded under the navbox on any Template namespace page. It is not transcluded when used as a sub-group or collapsible sub-group template (subgroup= yes or collapsible=yes).

Should the documentation appear when it is unwanted, it can be hidden by setting the doc parameter doc=no on the template. In most cases, the doc parameter is NOT used and the parameter is removed completely.