Template:Talk quote inline

Example text

Template documentation follows
Note: the template above may sometimes be partially or fully invisible.
Visit "Template:Talk quote inline/doc" to edit its documentation if it is available. (How does this work?)

This template is used on approximately 180,000 pages.
To avoid major disruption and server load, any changes should be tested in the template's /sandbox or /testcases subpages, or in your own user subpage. The tested changes can be added to this page in a single edit. Consider discussing changes on the talk page before implementing them.

Shortcuts

{{tqTemplate:Tq}}
{{tpq}}
{{TQ}}

Lua error in Module:TNT at line 159: Missing JsonConfig extension; Cannot load https://commons.wikimedia.org/wiki/Data:I18n/Uses TemplateStyles.tab. Template {{talk quote inline}} (a.k.a. {{talk quotation}} or the shortcut {{tq}}) is used on talk pages (and in Wikipedia process pages, e.g. noticeboards) to highlight a short excerpt of quoted material of other editors' comments or from an article or source.

Usage

To quote a multi-paragraph excerpt or other block content instead of an inline entry, use {{talk quote block}} or its shortcut {{tqb}} (a.k.a. {{talkquote}} or {{tq2}}).

To format examples, especially when using quotation marks or italics could be confusing and an inline typeface change is needed, use {{xt}} or one of its subtemplates (used frequently in the Manual of Style).

By default, the template changes the given text to serif typeface and green color. The accompanying change in typeface to a serif (roman) or italic type style (example text) is to make it fully accessible for those readers with red/green color blindness.

This template is not intended for use in articles, and displays an error message if it is used in the article namespace.

Parameters

The first unnamed parameter is the text to highlight with the template. As with all templates, when an unnamed first parameter contains an equals character (=), prefixing the text with |1= is required to ensure the character is correctly interpreted as being part of the normal text; otherwise it will break the template. Incorrect usages (no |1= where needed or outright no text) are tracked in Category:Pages incorrectly using the talk quote inline template (0).

|italic=yes or |i=yes will force the content to be green and italicised only (no change to serif font style); any value may be used, e.g. |i=y. This is typically used inside a block of text that is already serif-styled to make the highlighted text stand out better.

|title= takes text, which cannot be marked up in any way, and displays it as a pop-up "tooltip" (in most browsers) when the cursor hovers over the span. The most common use of this is to provide attribution.

|q=yes or |quotes=yes adds quotation marks around the colored text.

Examples

What you write: ...when you said, {{tq|Lorem ipsum '''dolor''' sit}}, and, {{tq|consectetur adipiscing elit|i=yes|title=This is a tooltip}}.
What you get: ...when you said, Lorem ipsum dolor sit, and, consectetur adipiscing elit.
What you write: ...when you said, {{tq|Lorem ipsum '''dolor''' sit|q=yes}}, and, {{tq|consectetur adipiscing elit|q=yes|i=yes|title=This is a tooltip}}.
What you get: ...when you said, Lorem ipsum dolor sit, and, consectetur adipiscing elit.

(Run your mouse over the words "consectetur adipiscing elit" and in a second you will see a tooltip pop up next to the mouse cursor which says, "This is a tooltip".)

Maintenance categories

TemplateData

This is the TemplateData for this template used by TemplateWizard, VisualEditor and other tools. See a monthly parameter usage report for Template:Talk quote inline in articles based on its TemplateData.

TemplateData for Talk quote inline

Highlights a short excerpt of quoted material of other editors' comments or from an article or source

Template parameters[Edit template data]
Parameter		Description	Type	Status
Text	`1`	Text to highlight	Content	required
Title	`title`	Takes text, which cannot be marked up in any way, and displays it as a pop-up "tooltip" (in most browsers) when the cursor hovers over the span. The most common use of this is to provide attribution.	String	optional
Italic?	`italic` `i`	Makes the content italicised and the same sans-serif font as normal text	Boolean	optional
Quotes?	`quotes` `q`	Use 'yes' or any non-blank value to add quotation marks around the colored text	Boolean	optional

Template:Talk quote inline invokes Module:Navbox using Lua.

Usage

This template can be used to make a standard navigation box. It is intended for use within another template that standardises the title and contents of the box (see Template:ShipNavbox). This template SHOULD NOT be used directly within articles, as it creates a maintenance burden to do so whenever the contents of the box have to be updated.

The purpose of this template is to standardise the attributes of all navigation boxes, for example, their colours and other CSS attributes. The template is fairly simple, and could be extended to add other features in the future. Using this template allows changes to be implemented much quicker and easier than editing each template separately.

Syntax

{{navbox
|state      = uncollapsed, collapsed, plain, autocollapse (default)
|name       = mandatory - name of the template
|style      = optional - style for the whole table
|title      = mandatory - navbox header
|gtitleN    = optional - title of N-th group of items
|styleN     = optional - style for groupN; i.e. text-align
|groupN     = mandatory - list of groups of items
|fstyle     = optional - style for footer ; i.e. text-align
|footer     = optional - navbox footer
}}

Groups: Currently there is no technical limit to the maximum number of groups.
- Groups of items can be added as parameters: group1, group2, group3, ... up to groupN.
Group title: Each group has its own title parameter: gtitle1, gtitle2, gtitle3, ... up to gtitleN. Note that the default width for the first column is 15%.
Group style: Style may also be customised to each group in: style1, style2, style3, ... up to styleN.
- Note that neither the title nor the items have any wiki-links built into the template. As a result, users of the template are free to use wiki-links as they wish.
Line breaks: Line-breaks (<br />) are unnecessary, as text wrapping is done automatically by the template. This also includes links and text in gtitleN and groupN.
Bullets: Create unordered lists with lines beginning with *.
Pipe links: Because of the nature of template syntax, it may be necessary to use Template:! ({{!}}).

States

Autocollapse: By default, the state of a navbox is "autocollapsed". This means that if the number of navboxes in a page exceeds the maximum allocation of the collapsible navboxes, then the remaining navboxes are collapsed automatically. For more information (or to change the setting), see MediaWiki:Common.js.
- Currently, the autocollapse allocation is 2 (see MediaWiki:Common.js). This means that if there are 3 navboxes in a page, the third and subsequent navboxes will be collapsed automatically.
Uncollapsed: Forces the navbox to be displayed.
- All of the navboxes in this documentation are in the uncollapsed state.
Collapsed: The reverse of uncollapsed. Forces the navbox to be hidden instead.
- Navboxes with a height of more than 300 pixels will also be collapsed automatically. For more information (or to change the setting), see MediaWiki:Common.js.
Plain: Removes the "show/hide" link.

Sub-groups

For larger navboxes, it may be necessary to include sub-groups within a particular group of items. It is also possible to collapsible navboxes within the parent navbox, see Collapsible sub-groups.
To create sub-groups within {{navbox}}, certain parameters are to be included:
- The parent navbox group (i.e. group2 in the example below) requires the type parameter (gtype2 = Subgroup).
- The nested navbox (sub-group) requires the inclusion of the sub-group parameter (subgroup = yes). This enables the template to differentiate between the sub-group and the parent navbox.

{{navbox
|name    =
|title   =
|gtitle1 =
|group1  =
|gtitle2 =  
|gtype2  = Subgroup (mandatory)
|group2  = 
  {{navbox
  |subgroup = yes (mandatory)
  |gtitle1  = 
  |group1   =
  |gtitle2  = 
  |group2   = 
  }}
}}

Collapsible sub-groups

For extremely long navboxes, it is recommended to use collapsible navboxes within the parent navbox. Further sub-groups can then be added to these collapsible navboxes.
To create collapsible sub-groups within {{navbox}}, these parameters need to be included:
- The parent navbox is almost always uncollapsed (state=uncollapsed).
- The parent navbox group (i.e. group1 in the example below) requires the type parameter (gtype1 = Subgroup).
- The nested collapsible navbox requires the inclusion of the collapsible parameter (collapsible = yes). This enables the template to differentiate between the collapsible navbox and the parent navbox.
- The nested collapsible navbox is forcefully collapsed (state=collapsed).

{{navbox
|state  = uncollapsed
|name   = 
|gtype1 = Subgroup
|group1 = 
  {{navbox
  |collapsible = yes
  |state   = collapsed
  |title   = 
  |gtitle1 = 
  |group1  = 
  |gtitle2 = 
  |group2  = 
  }}
}}

Use of images

The use of images in navboxes is permitted, but please resize the images to keep them small. Inventory-sized images (25-30 pixels) are recommended.
Please use {{t|plink}} to create links with images. Use {{t|plink}} for any case where text is not desired after the link. It functions the same as {{t|plink}}, but it does not produce a wikilink in text. Use {{t|chatl}} to link chatheads. These templates create links for both the image and text (except for {{t|plink}}) using far less wikicode than the standard syntax.

Link and file share the same name

{{plink|Item}}

File name differs from the link

{{plink|Item|File}}

Link and file share the same name, but different text is desired to display

{{plink|Item|alt=Text}}

File name differs from the link and different text is desired to display

{{plink|Item|File|alt=Text}}

Categorising

Navboxes are very useful for transcluding categories onto a large number of pages that share both a trait and the navigation box. For example: Template:ShipNavbox transcludes Category:Ships onto every page that uses it.

There are 2 methods of categorising pages with navboxes:

The first way is with {{t|Ctg}}. This is the preferred method, and can be used in most cases. The rules and operations for the Category handler template are very simple; however, they are enough to produce the desired results on most pages.

Categorisation should only be used on a template for large-scale addition. It is unhelpful, for example, to use a rule that only applies to 1 page.

Examples

To see the following navboxes in action, see Template:Navbox.

Single line navbox with centered list

{{navbox
|name    = 
|title   = 
|style1  = text-align:center
|group1  =
}}

Navbox with standard footer

{{navbox
|name    = 
|title   = 
|gtitle1 = 
|group1  = 
|footer  = Centered footer
}}

Navbox with styled footer

{{navbox
|name    = 
|title   = 
|gtitle1 = 
|group1  = 
|fstyle  = text-align:right
|footer  = Right-aligned footer
}}

Multiple line navbox

{{navbox
|name    = 
|title   = 
|gtitle1 = Group title 1
|group1  = 
|gtitle2 = Group title 2
|group2  = 
|gtitle3 = Group title 3
|group3  = 
}}

Collapsed navbox

{{navbox
|state   = collapsed
|name    = 
|title   = 
|style1  = text-align:center
|group1  = 
}}

Plain navbox with Tnavbar

{{navbox
|state   = plain
|name    = 
|title   = 
|style1  = text-align:center
|group1  = 
}}

Plain navbox without Tnavbar

{{navbox
|state   = plain
|title   = 
|style1  = text-align:center
|group1  = 
}}

Complicated navbox

{{navbox
|state   = uncollapsed
|name    = 
|title   = 
|gtitle1 = Level 1 Title 1
|group1  = 
|gtitle2 = Level 1 Title 2
|group2  = 
|gtitle3 = Level 1 Title 3
|group3  = 
|gtitle4 = Level 1 Title 4
|group4  = 
|gtitle5 = Level 1 Title 5
|gtype5  = Subgroup
|group5  = 
  {{navbox
  |subgroup = Yes
  |gtitle1  = Level 2 Title 1
  |group1   =
  |gtitle2  = Level 2 Title 2
  |group2   =
  |gtitle3  = Level 2 Title 3
  |gtype3   = Subgroup
  |group3   = 
    {{navbox
    |subgroup = Yes
    |gtitle1  = Level 3 Title 1
    |group1   =
    |gtitle2  = Level 3 Title 2
    |group2   =
    }}
  |gtitle4  = Level 2 Title 4
  |group4   = 
  }}
|gtitle6 = Level 1 Title 6
|group6  = 
|gtitle7 = Level 1 Title 7
|group7  = 
|fstyle  = 
|footer  = 
}}

Preventing unwanted documentation

The Navbox template's documentation is automatically transcluded under the navbox on any Template namespace page. It is not transcluded when used as a sub-group or collapsible sub-group template (subgroup= yes or collapsible=yes).

Should the documentation appear when it is unwanted, it can be hidden by setting the doc parameter doc=no on the template. In most cases, the doc parameter is NOT used and the parameter is removed completely.

Template:Talk quote inline invokes Module:Navbox using Lua.

Usage

This template can be used to make a standard navigation box. It is intended for use within another template that standardises the title and contents of the box (see Template:ShipNavbox). This template SHOULD NOT be used directly within articles, as it creates a maintenance burden to do so whenever the contents of the box have to be updated.

The purpose of this template is to standardise the attributes of all navigation boxes, for example, their colours and other CSS attributes. The template is fairly simple, and could be extended to add other features in the future. Using this template allows changes to be implemented much quicker and easier than editing each template separately.

Syntax

{{navbox
|state      = uncollapsed, collapsed, plain, autocollapse (default)
|name       = mandatory - name of the template
|style      = optional - style for the whole table
|title      = mandatory - navbox header
|gtitleN    = optional - title of N-th group of items
|styleN     = optional - style for groupN; i.e. text-align
|groupN     = mandatory - list of groups of items
|fstyle     = optional - style for footer ; i.e. text-align
|footer     = optional - navbox footer
}}

Groups: Currently there is no technical limit to the maximum number of groups.
- Groups of items can be added as parameters: group1, group2, group3, ... up to groupN.
Group title: Each group has its own title parameter: gtitle1, gtitle2, gtitle3, ... up to gtitleN. Note that the default width for the first column is 15%.
Group style: Style may also be customised to each group in: style1, style2, style3, ... up to styleN.
- Note that neither the title nor the items have any wiki-links built into the template. As a result, users of the template are free to use wiki-links as they wish.
Line breaks: Line-breaks (<br />) are unnecessary, as text wrapping is done automatically by the template. This also includes links and text in gtitleN and groupN.
Bullets: Create unordered lists with lines beginning with *.
Pipe links: Because of the nature of template syntax, it may be necessary to use Template:! ({{!}}).

States

Autocollapse: By default, the state of a navbox is "autocollapsed". This means that if the number of navboxes in a page exceeds the maximum allocation of the collapsible navboxes, then the remaining navboxes are collapsed automatically. For more information (or to change the setting), see MediaWiki:Common.js.
- Currently, the autocollapse allocation is 2 (see MediaWiki:Common.js). This means that if there are 3 navboxes in a page, the third and subsequent navboxes will be collapsed automatically.
Uncollapsed: Forces the navbox to be displayed.
- All of the navboxes in this documentation are in the uncollapsed state.
Collapsed: The reverse of uncollapsed. Forces the navbox to be hidden instead.
- Navboxes with a height of more than 300 pixels will also be collapsed automatically. For more information (or to change the setting), see MediaWiki:Common.js.
Plain: Removes the "show/hide" link.

Sub-groups

For larger navboxes, it may be necessary to include sub-groups within a particular group of items. It is also possible to collapsible navboxes within the parent navbox, see Collapsible sub-groups.
To create sub-groups within {{navbox}}, certain parameters are to be included:
- The parent navbox group (i.e. group2 in the example below) requires the type parameter (gtype2 = Subgroup).
- The nested navbox (sub-group) requires the inclusion of the sub-group parameter (subgroup = yes). This enables the template to differentiate between the sub-group and the parent navbox.

{{navbox
|name    =
|title   =
|gtitle1 =
|group1  =
|gtitle2 =  
|gtype2  = Subgroup (mandatory)
|group2  = 
  {{navbox
  |subgroup = yes (mandatory)
  |gtitle1  = 
  |group1   =
  |gtitle2  = 
  |group2   = 
  }}
}}

Collapsible sub-groups

For extremely long navboxes, it is recommended to use collapsible navboxes within the parent navbox. Further sub-groups can then be added to these collapsible navboxes.
To create collapsible sub-groups within {{navbox}}, these parameters need to be included:
- The parent navbox is almost always uncollapsed (state=uncollapsed).
- The parent navbox group (i.e. group1 in the example below) requires the type parameter (gtype1 = Subgroup).
- The nested collapsible navbox requires the inclusion of the collapsible parameter (collapsible = yes). This enables the template to differentiate between the collapsible navbox and the parent navbox.
- The nested collapsible navbox is forcefully collapsed (state=collapsed).

{{navbox
|state  = uncollapsed
|name   = 
|gtype1 = Subgroup
|group1 = 
  {{navbox
  |collapsible = yes
  |state   = collapsed
  |title   = 
  |gtitle1 = 
  |group1  = 
  |gtitle2 = 
  |group2  = 
  }}
}}

Use of images

The use of images in navboxes is permitted, but please resize the images to keep them small. Inventory-sized images (25-30 pixels) are recommended.
Please use {{t|plink}} to create links with images. Use {{t|plink}} for any case where text is not desired after the link. It functions the same as {{t|plink}}, but it does not produce a wikilink in text. Use {{t|chatl}} to link chatheads. These templates create links for both the image and text (except for {{t|plink}}) using far less wikicode than the standard syntax.

Link and file share the same name

{{plink|Item}}

File name differs from the link

{{plink|Item|File}}

Link and file share the same name, but different text is desired to display

{{plink|Item|alt=Text}}

File name differs from the link and different text is desired to display

{{plink|Item|File|alt=Text}}

Categorising

Navboxes are very useful for transcluding categories onto a large number of pages that share both a trait and the navigation box. For example: Template:ShipNavbox transcludes Category:Ships onto every page that uses it.

There are 2 methods of categorising pages with navboxes:

The first way is with {{t|Ctg}}. This is the preferred method, and can be used in most cases. The rules and operations for the Category handler template are very simple; however, they are enough to produce the desired results on most pages.

Categorisation should only be used on a template for large-scale addition. It is unhelpful, for example, to use a rule that only applies to 1 page.

Examples

To see the following navboxes in action, see Template:Navbox.

Single line navbox with centered list

{{navbox
|name    = 
|title   = 
|style1  = text-align:center
|group1  =
}}

Navbox with standard footer

{{navbox
|name    = 
|title   = 
|gtitle1 = 
|group1  = 
|footer  = Centered footer
}}

Navbox with styled footer

{{navbox
|name    = 
|title   = 
|gtitle1 = 
|group1  = 
|fstyle  = text-align:right
|footer  = Right-aligned footer
}}

Multiple line navbox

{{navbox
|name    = 
|title   = 
|gtitle1 = Group title 1
|group1  = 
|gtitle2 = Group title 2
|group2  = 
|gtitle3 = Group title 3
|group3  = 
}}

Collapsed navbox

{{navbox
|state   = collapsed
|name    = 
|title   = 
|style1  = text-align:center
|group1  = 
}}

Plain navbox with Tnavbar

{{navbox
|state   = plain
|name    = 
|title   = 
|style1  = text-align:center
|group1  = 
}}

Plain navbox without Tnavbar

{{navbox
|state   = plain
|title   = 
|style1  = text-align:center
|group1  = 
}}

Complicated navbox

{{navbox
|state   = uncollapsed
|name    = 
|title   = 
|gtitle1 = Level 1 Title 1
|group1  = 
|gtitle2 = Level 1 Title 2
|group2  = 
|gtitle3 = Level 1 Title 3
|group3  = 
|gtitle4 = Level 1 Title 4
|group4  = 
|gtitle5 = Level 1 Title 5
|gtype5  = Subgroup
|group5  = 
  {{navbox
  |subgroup = Yes
  |gtitle1  = Level 2 Title 1
  |group1   =
  |gtitle2  = Level 2 Title 2
  |group2   =
  |gtitle3  = Level 2 Title 3
  |gtype3   = Subgroup
  |group3   = 
    {{navbox
    |subgroup = Yes
    |gtitle1  = Level 3 Title 1
    |group1   =
    |gtitle2  = Level 3 Title 2
    |group2   =
    }}
  |gtitle4  = Level 2 Title 4
  |group4   = 
  }}
|gtitle6 = Level 1 Title 6
|group6  = 
|gtitle7 = Level 1 Title 7
|group7  = 
|fstyle  = 
|footer  = 
}}

Preventing unwanted documentation

The Navbox template's documentation is automatically transcluded under the navbox on any Template namespace page. It is not transcluded when used as a sub-group or collapsible sub-group template (subgroup= yes or collapsible=yes).

Should the documentation appear when it is unwanted, it can be hidden by setting the doc parameter doc=no on the template. In most cases, the doc parameter is NOT used and the parameter is removed completely.