Template:Being closed

Template documentation follows
Note: the template above may sometimes be partially or fully invisible.
Visit "Template:Being closed/doc" to edit its documentation if it is available. (How does this work?)

The notice is placed at the top of a discussion section or sub-page when you are actively working on the close and intend to post the result as soon as possible, or in a few hours if the discussion is acrimonious. If substituted, it displays the user who added it along with a timestamp; otherwise, it instructs readers to check the page history for that information. It informs other editors that someone is currently working on the close, that discussion should end, and that other closers should not bother to work on the discussion. This helps reduce edit conflicts and avoid duplication of work.

Usage

• Basic usage:

{{subst:Being closed|closer=[[User:{{subst:REVISIONUSER}}|{{subst:REVISIONUSER}}]]}}

• With a closer's note:

{{subst:Being closed|closer=[[User:{{subst:REVISIONUSER}}|{{subst:REVISIONUSER}}]]|comment=I'm currently reading through the discussion and will close it within the next two hours.}}

• Substituted with locking:

{{subst:Being closed|closer=[[User:{{subst:REVISIONUSER}}|{{subst:REVISIONUSER}}]]|lock=yes}}

• Transcluded with locking:

{{Being closed|closer=[[User:{{subst:REVISIONUSER}}|{{subst:REVISIONUSER}}]]|lock=yes}}

• The |lock= parameter (alias |restrict=) controls whether the reply button, the add-new-section link, and section-edit links on headings are suppressed on the page the notice is placed on:
  • Whether it is substituted or left as a live transclusion, discussion locking is off by default. Set |lock=yes to use the notice without and hide the "Reply" button.
  • However, substituting the template has the added benefit that, if |lock= is set to yes, the lock only ever applies to the page the notice is actually on. If that page is later transcluded elsewhere, for example into a log page, the lock has no effect there.
  • When the discussion is locked, editors can still add comments or edit the page, but they can't use the "Reply" button. This is merely to disincentivise new comments and is not intended as a surefire way to stop editors from adding new comments while you're closing the discussion.

TemplateData

This is the TemplateData for this template used by TemplateWizard, VisualEditor and other tools. See a monthly parameter usage report for Template:Being closed in articles based on its TemplateData.

TemplateData for Being closed

Notifies editors that a discussion is currently being closed, to reduce edit conflicts and duplicated effort.

Template parameters[Edit template data]

Parameter		Description	Type	Status
Closer	closer	The editor, or group of editors, who is closing the discussion. Example A group of highly trained orangutans Auto value [[User:{{subst:REVISIONUSER}}|{{subst:REVISIONUSER}}]]	String	optional
Lock discussion	lock restrict	Whether to temporarily disable the 'Reply', new sections, and section-edit links on the page this notice is placed on. Default is true when the template is substituted, and false when it is left as a live transclusion. Applies only to the page the notice is actually on, not to any page that transcludes it. Default no Example yes Auto value yes	Boolean	optional
Plural	plural	Set to true if there is more than one closer, so the notice uses plural wording (for example, 'are' instead of 'is'). Default false	Boolean	optional
Estimate	estimate	The estimated time when the close will be complete. Default shortly Example within an hour	String	optional
Closer's note	comment 1	An optional note from the closer, shown in a separate box below the main notice, for example to explain the closer's reasoning or expected timing. Can also be supplied as the first unnamed parameter. Example I'm currently reading through the discussion and will close it within the next two hours.	String	optional

See also

• {{In use}}, similar template used to notify readers that a large edit is taking place
• Closure:
  • WP:Closing discussions - information page regarding closing discussions

Template:Being closed invokes Module:Navbox using Lua.

Usage

This template can be used to make a standard navigation box. It is intended for use within another template that standardises the title and contents of the box (see Template:ShipNavbox). This template SHOULD NOT be used directly within articles, as it creates a maintenance burden to do so whenever the contents of the box have to be updated.

The purpose of this template is to standardise the attributes of all navigation boxes, for example, their colours and other CSS attributes. The template is fairly simple, and could be extended to add other features in the future. Using this template allows changes to be implemented much quicker and easier than editing each template separately.

Syntax

{{navbox
|state      = uncollapsed, collapsed, plain, autocollapse (default)
|name       = mandatory - name of the template
|style      = optional - style for the whole table
|title      = mandatory - navbox header
|gtitleN    = optional - title of N-th group of items
|styleN     = optional - style for groupN; i.e. text-align
|groupN     = mandatory - list of groups of items
|fstyle     = optional - style for footer ; i.e. text-align
|footer     = optional - navbox footer
}}

• Groups: Currently there is no technical limit to the maximum number of groups.
  • Groups of items can be added as parameters: group1, group2, group3, ... up to groupN.
• Group title: Each group has its own title parameter: gtitle1, gtitle2, gtitle3, ... up to gtitleN. Note that the default width for the first column is 15%.
• Group style: Style may also be customised to each group in: style1, style2, style3, ... up to styleN.
  • Note that neither the title nor the items have any wiki-links built into the template. As a result, users of the template are free to use wiki-links as they wish.
• Line breaks: Line-breaks (<br />) are unnecessary, as text wrapping is done automatically by the template. This also includes links and text in gtitleN and groupN.
• Bullets: Create unordered lists with lines beginning with *.
• Pipe links: Because of the nature of template syntax, it may be necessary to use Template:! ({{!}}).

States

• Autocollapse: By default, the state of a navbox is "autocollapsed". This means that if the number of navboxes in a page exceeds the maximum allocation of the collapsible navboxes, then the remaining navboxes are collapsed automatically. For more information (or to change the setting), see MediaWiki:Common.js.
  • Currently, the autocollapse allocation is 2 (see MediaWiki:Common.js). This means that if there are 3 navboxes in a page, the third and subsequent navboxes will be collapsed automatically.
• Uncollapsed: Forces the navbox to be displayed.
  • All of the navboxes in this documentation are in the uncollapsed state.
• Collapsed: The reverse of uncollapsed. Forces the navbox to be hidden instead.
  • Navboxes with a height of more than 300 pixels will also be collapsed automatically. For more information (or to change the setting), see MediaWiki:Common.js.
• Plain: Removes the "show/hide" link.

Sub-groups

• For larger navboxes, it may be necessary to include sub-groups within a particular group of items. It is also possible to collapsible navboxes within the parent navbox, see Collapsible sub-groups.
• To create sub-groups within {{navbox}}, certain parameters are to be included:
  • The parent navbox group (i.e. group2 in the example below) requires the type parameter (gtype2 = Subgroup).
  • The nested navbox (sub-group) requires the inclusion of the sub-group parameter (subgroup = yes). This enables the template to differentiate between the sub-group and the parent navbox.

{{navbox
|name    =
|title   =
|gtitle1 =
|group1  =
|gtitle2 =  
|gtype2  = Subgroup (mandatory)
|group2  = 
  {{navbox
  |subgroup = yes (mandatory)
  |gtitle1  = 
  |group1   =
  |gtitle2  = 
  |group2   = 
  }}
}}

Collapsible sub-groups

• For extremely long navboxes, it is recommended to use collapsible navboxes within the parent navbox. Further sub-groups can then be added to these collapsible navboxes.
• To create collapsible sub-groups within {{navbox}}, these parameters need to be included:
  • The parent navbox is almost always uncollapsed (state=uncollapsed).
  • The parent navbox group (i.e. group1 in the example below) requires the type parameter (gtype1 = Subgroup).
  • The nested collapsible navbox requires the inclusion of the collapsible parameter (collapsible = yes). This enables the template to differentiate between the collapsible navbox and the parent navbox.
  • The nested collapsible navbox is forcefully collapsed (state=collapsed).

{{navbox
|state  = uncollapsed
|name   = 
|gtype1 = Subgroup
|group1 = 
  {{navbox
  |collapsible = yes
  |state   = collapsed
  |title   = 
  |gtitle1 = 
  |group1  = 
  |gtitle2 = 
  |group2  = 
  }}
}}

Use of images

• The use of images in navboxes is permitted, but please resize the images to keep them small. Inventory-sized images (25-30 pixels) are recommended.
• Please use {{t|plink}} to create links with images. Use {{t|plink}} for any case where text is not desired after the link. It functions the same as {{t|plink}}, but it does not produce a wikilink in text. Use {{t|chatl}} to link chatheads. These templates create links for both the image and text (except for {{t|plink}}) using far less wikicode than the standard syntax.

Link and file share the same name

{{plink|Item}}

File name differs from the link

{{plink|Item|File}}

Link and file share the same name, but different text is desired to display

{{plink|Item|alt=Text}}

File name differs from the link and different text is desired to display

{{plink|Item|File|alt=Text}}

Categorising

Navboxes are very useful for transcluding categories onto a large number of pages that share both a trait and the navigation box. For example: Template:ShipNavbox transcludes Category:Ships onto every page that uses it.

There are 2 methods of categorising pages with navboxes:

The first way is with {{t|Ctg}}. This is the preferred method, and can be used in most cases. The rules and operations for the Category handler template are very simple; however, they are enough to produce the desired results on most pages.

Categorisation should only be used on a template for large-scale addition. It is unhelpful, for example, to use a rule that only applies to 1 page.

Examples

To see the following navboxes in action, see Template:Navbox.

Single line navbox with centered list

{{navbox
|name    = 
|title   = 
|style1  = text-align:center
|group1  =
}}

Navbox with standard footer

{{navbox
|name    = 
|title   = 
|gtitle1 = 
|group1  = 
|footer  = Centered footer
}}

Navbox with styled footer

{{navbox
|name    = 
|title   = 
|gtitle1 = 
|group1  = 
|fstyle  = text-align:right
|footer  = Right-aligned footer
}}

Multiple line navbox

{{navbox
|name    = 
|title   = 
|gtitle1 = Group title 1
|group1  = 
|gtitle2 = Group title 2
|group2  = 
|gtitle3 = Group title 3
|group3  = 
}}

Collapsed navbox

{{navbox
|state   = collapsed
|name    = 
|title   = 
|style1  = text-align:center
|group1  = 
}}

Plain navbox with Tnavbar

{{navbox
|state   = plain
|name    = 
|title   = 
|style1  = text-align:center
|group1  = 
}}

Plain navbox without Tnavbar

{{navbox
|state   = plain
|title   = 
|style1  = text-align:center
|group1  = 
}}

Complicated navbox

{{navbox
|state   = uncollapsed
|name    = 
|title   = 
|gtitle1 = Level 1 Title 1
|group1  = 
|gtitle2 = Level 1 Title 2
|group2  = 
|gtitle3 = Level 1 Title 3
|group3  = 
|gtitle4 = Level 1 Title 4
|group4  = 
|gtitle5 = Level 1 Title 5
|gtype5  = Subgroup
|group5  = 
  {{navbox
  |subgroup = Yes
  |gtitle1  = Level 2 Title 1
  |group1   =
  |gtitle2  = Level 2 Title 2
  |group2   =
  |gtitle3  = Level 2 Title 3
  |gtype3   = Subgroup
  |group3   = 
    {{navbox
    |subgroup = Yes
    |gtitle1  = Level 3 Title 1
    |group1   =
    |gtitle2  = Level 3 Title 2
    |group2   =
    }}
  |gtitle4  = Level 2 Title 4
  |group4   = 
  }}
|gtitle6 = Level 1 Title 6
|group6  = 
|gtitle7 = Level 1 Title 7
|group7  = 
|fstyle  = 
|footer  = 
}}

Preventing unwanted documentation

The Navbox template's documentation is automatically transcluded under the navbox on any Template namespace page. It is not transcluded when used as a sub-group or collapsible sub-group template (subgroup= yes or collapsible=yes).

Should the documentation appear when it is unwanted, it can be hidden by setting the doc parameter doc=no on the template. In most cases, the doc parameter is NOT used and the parameter is removed completely.

Template:Being closed invokes Module:Navbox using Lua.

Usage

This template can be used to make a standard navigation box. It is intended for use within another template that standardises the title and contents of the box (see Template:ShipNavbox). This template SHOULD NOT be used directly within articles, as it creates a maintenance burden to do so whenever the contents of the box have to be updated.

The purpose of this template is to standardise the attributes of all navigation boxes, for example, their colours and other CSS attributes. The template is fairly simple, and could be extended to add other features in the future. Using this template allows changes to be implemented much quicker and easier than editing each template separately.

Syntax

{{navbox
|state      = uncollapsed, collapsed, plain, autocollapse (default)
|name       = mandatory - name of the template
|style      = optional - style for the whole table
|title      = mandatory - navbox header
|gtitleN    = optional - title of N-th group of items
|styleN     = optional - style for groupN; i.e. text-align
|groupN     = mandatory - list of groups of items
|fstyle     = optional - style for footer ; i.e. text-align
|footer     = optional - navbox footer
}}

• Groups: Currently there is no technical limit to the maximum number of groups.
  • Groups of items can be added as parameters: group1, group2, group3, ... up to groupN.
• Group title: Each group has its own title parameter: gtitle1, gtitle2, gtitle3, ... up to gtitleN. Note that the default width for the first column is 15%.
• Group style: Style may also be customised to each group in: style1, style2, style3, ... up to styleN.
  • Note that neither the title nor the items have any wiki-links built into the template. As a result, users of the template are free to use wiki-links as they wish.
• Line breaks: Line-breaks (<br />) are unnecessary, as text wrapping is done automatically by the template. This also includes links and text in gtitleN and groupN.
• Bullets: Create unordered lists with lines beginning with *.
• Pipe links: Because of the nature of template syntax, it may be necessary to use Template:! ({{!}}).

States

• Autocollapse: By default, the state of a navbox is "autocollapsed". This means that if the number of navboxes in a page exceeds the maximum allocation of the collapsible navboxes, then the remaining navboxes are collapsed automatically. For more information (or to change the setting), see MediaWiki:Common.js.
  • Currently, the autocollapse allocation is 2 (see MediaWiki:Common.js). This means that if there are 3 navboxes in a page, the third and subsequent navboxes will be collapsed automatically.
• Uncollapsed: Forces the navbox to be displayed.
  • All of the navboxes in this documentation are in the uncollapsed state.
• Collapsed: The reverse of uncollapsed. Forces the navbox to be hidden instead.
  • Navboxes with a height of more than 300 pixels will also be collapsed automatically. For more information (or to change the setting), see MediaWiki:Common.js.
• Plain: Removes the "show/hide" link.

Sub-groups

• For larger navboxes, it may be necessary to include sub-groups within a particular group of items. It is also possible to collapsible navboxes within the parent navbox, see Collapsible sub-groups.
• To create sub-groups within {{navbox}}, certain parameters are to be included:
  • The parent navbox group (i.e. group2 in the example below) requires the type parameter (gtype2 = Subgroup).
  • The nested navbox (sub-group) requires the inclusion of the sub-group parameter (subgroup = yes). This enables the template to differentiate between the sub-group and the parent navbox.

{{navbox
|name    =
|title   =
|gtitle1 =
|group1  =
|gtitle2 =  
|gtype2  = Subgroup (mandatory)
|group2  = 
  {{navbox
  |subgroup = yes (mandatory)
  |gtitle1  = 
  |group1   =
  |gtitle2  = 
  |group2   = 
  }}
}}

Collapsible sub-groups

• For extremely long navboxes, it is recommended to use collapsible navboxes within the parent navbox. Further sub-groups can then be added to these collapsible navboxes.
• To create collapsible sub-groups within {{navbox}}, these parameters need to be included:
  • The parent navbox is almost always uncollapsed (state=uncollapsed).
  • The parent navbox group (i.e. group1 in the example below) requires the type parameter (gtype1 = Subgroup).
  • The nested collapsible navbox requires the inclusion of the collapsible parameter (collapsible = yes). This enables the template to differentiate between the collapsible navbox and the parent navbox.
  • The nested collapsible navbox is forcefully collapsed (state=collapsed).

{{navbox
|state  = uncollapsed
|name   = 
|gtype1 = Subgroup
|group1 = 
  {{navbox
  |collapsible = yes
  |state   = collapsed
  |title   = 
  |gtitle1 = 
  |group1  = 
  |gtitle2 = 
  |group2  = 
  }}
}}

Use of images

• The use of images in navboxes is permitted, but please resize the images to keep them small. Inventory-sized images (25-30 pixels) are recommended.
• Please use {{t|plink}} to create links with images. Use {{t|plink}} for any case where text is not desired after the link. It functions the same as {{t|plink}}, but it does not produce a wikilink in text. Use {{t|chatl}} to link chatheads. These templates create links for both the image and text (except for {{t|plink}}) using far less wikicode than the standard syntax.

Link and file share the same name

{{plink|Item}}

File name differs from the link

{{plink|Item|File}}

Link and file share the same name, but different text is desired to display

{{plink|Item|alt=Text}}

File name differs from the link and different text is desired to display

{{plink|Item|File|alt=Text}}

Categorising

Navboxes are very useful for transcluding categories onto a large number of pages that share both a trait and the navigation box. For example: Template:ShipNavbox transcludes Category:Ships onto every page that uses it.

There are 2 methods of categorising pages with navboxes:

The first way is with {{t|Ctg}}. This is the preferred method, and can be used in most cases. The rules and operations for the Category handler template are very simple; however, they are enough to produce the desired results on most pages.

Categorisation should only be used on a template for large-scale addition. It is unhelpful, for example, to use a rule that only applies to 1 page.

Examples

To see the following navboxes in action, see Template:Navbox.

Single line navbox with centered list

{{navbox
|name    = 
|title   = 
|style1  = text-align:center
|group1  =
}}

Navbox with standard footer

{{navbox
|name    = 
|title   = 
|gtitle1 = 
|group1  = 
|footer  = Centered footer
}}

Navbox with styled footer

{{navbox
|name    = 
|title   = 
|gtitle1 = 
|group1  = 
|fstyle  = text-align:right
|footer  = Right-aligned footer
}}

Multiple line navbox

{{navbox
|name    = 
|title   = 
|gtitle1 = Group title 1
|group1  = 
|gtitle2 = Group title 2
|group2  = 
|gtitle3 = Group title 3
|group3  = 
}}

Collapsed navbox

{{navbox
|state   = collapsed
|name    = 
|title   = 
|style1  = text-align:center
|group1  = 
}}

Plain navbox with Tnavbar

{{navbox
|state   = plain
|name    = 
|title   = 
|style1  = text-align:center
|group1  = 
}}

Plain navbox without Tnavbar

{{navbox
|state   = plain
|title   = 
|style1  = text-align:center
|group1  = 
}}

Complicated navbox

{{navbox
|state   = uncollapsed
|name    = 
|title   = 
|gtitle1 = Level 1 Title 1
|group1  = 
|gtitle2 = Level 1 Title 2
|group2  = 
|gtitle3 = Level 1 Title 3
|group3  = 
|gtitle4 = Level 1 Title 4
|group4  = 
|gtitle5 = Level 1 Title 5
|gtype5  = Subgroup
|group5  = 
  {{navbox
  |subgroup = Yes
  |gtitle1  = Level 2 Title 1
  |group1   =
  |gtitle2  = Level 2 Title 2
  |group2   =
  |gtitle3  = Level 2 Title 3
  |gtype3   = Subgroup
  |group3   = 
    {{navbox
    |subgroup = Yes
    |gtitle1  = Level 3 Title 1
    |group1   =
    |gtitle2  = Level 3 Title 2
    |group2   =
    }}
  |gtitle4  = Level 2 Title 4
  |group4   = 
  }}
|gtitle6 = Level 1 Title 6
|group6  = 
|gtitle7 = Level 1 Title 7
|group7  = 
|fstyle  = 
|footer  = 
}}

Preventing unwanted documentation

The Navbox template's documentation is automatically transcluded under the navbox on any Template namespace page. It is not transcluded when used as a sub-group or collapsible sub-group template (subgroup= yes or collapsible=yes).

Should the documentation appear when it is unwanted, it can be hidden by setting the doc parameter doc=no on the template. In most cases, the doc parameter is NOT used and the parameter is removed completely.