Docking

In order to use a station's services, you must dock with the station.

Docking is a three stage process:

Requesting Docking Permission

Before you can get inside a station, you must first ask for permission to land, otherwise you won't have a specific pad to land at. This is done via the Contacts tab: enter the Target menu ("1" by default), move to the Contacts tab, select the station, and finally select "Request Docking Permission". If you were rejected, you were either out of range or have infractions against the station; get within 7.5 kilometers of the station and try again. If you were still rejected, you definitely have infractions and cannot dock for the moment.

If you were acknowledged, the station will tell you what pad number to land at. You now have 10 minutes to land.

Entering the Station

All stations rotate to generate centripetal force, which effectively acts as gravity for its crew and citizens. For pilots, it effectively acts as a huge pain, but it can be dealt with. As you approach the station's entry port, focus on centering your ship with the port first, so that you don't crash into the port's walls. Once you've centered the port, start aligning the ship. This can be done manually, or by pressing the rotational assistance button. If done manually, keep in mind that most ships are wider than they are tall.

Once inside, find the pad with the number the station assigned you, and lower the landing gear. You now need to actually land the ship.

Landing Your Ship

Landing is simple in theory, but can take finesse if you don't have a joystick throttle. Approach your pad - if you're close enough and landing gears are down, the radar will be replaced with a diagram showing your ship's position relative to the landing point. In the diagram, there is a dot extending from your ship to the pad, like a shadow; you want to get that dot centered with the pad's circle first. When the dot is centered, the pad's diagram will turn blue, and you can thrust down to complete the landing. Congratulations, you're docked!

Docking Tips

The docking port on a Coriolis station is always positioned on the 'end' that is spinning anti-clockwise. Looking for the advertising holograms often helps.