Hyperspace
Appearance
Hyperspace is the method of travel between star systems at superluminal speeds. Only ships fitted with a hyperspace jump-capable Frameshift Drive are able to initiate a hyperspace jump on their own.
Please Note: The following is taken directly from the Design Decision Forum and will need to be checked and amended as elements are implemented into current gameplay.
Before the player can initiate a hyperspace jump they must set the final destination of the journey:
- The player selects a destination using the galaxy map navigation interface
- The jump range is hard-limited by several factors:
- The amount of fuel available determines if a jump is possible
- The basic jump range of the ship’s hyperdrive, determines the distance of each step of the trip
- Different hyperdrives have different capabilities
- Jump range
- Fuel efficiency
- Charge time
- Mass
- Hyperdrives can be replaced with better models to increase capabilities
- Different hyperdrives have different capabilities
- Jump locations available to their star map determine the route of the trip
- The total mass effects the jump range, this can be effected by:
- The mass of the modules
- Cargo
- Fuel
- The player may also have access to additional information that could inform their decisions:
- Activity heat maps for trade, piracy, conflicts etc.
- Hyperspace tracking/prediction devices to monitor local ship activity
- A hyperspace journey may comprise of a number of jumps depending on the distance travelled
- Changing between economic and fastest filter as well as cargo mass effects the route planner
- Once a destination has been inputted the hyperdrive can be engaged
Once a journey has been set, the player can engage the hyperdrive:
- When the hyperdrive is engaged it begins to draw power from the ship’s power plant until it is fully charged:
- The hyperdrive cannot be initiated if its power draw would make the total power draw of the ship exceed the ship’s power plant capacity
- The player can turn off other powered systems to free up capacity for the hyperdrive
- The hyperdrive cannot be initiated when the ship is too close to a celestial body or large man-made structure; the ship must use in-system travel to reach a minimum jump distance
- To create a safe transit the hyperdrive must perform real-time changes based on ship’s power draw; changes to the ship’s total power draw (up or down) slow the charge rate by a percentage value for a duration
- The percentage value and duration is based on the quality of the hyperdrive
- The hyperdrive is sensitive to interference caused by incoming attacks; when an attack impacts on the hull or shields, the hyperdrive’s charge rate is slowed by a percentage value for a duration
- This effect cannot stack with itself
- The percentage value and duration is based on the quality of the hyperdrive
- A hyperdrive module that has suffered damage may suffer a malfunction when initiated
- The charge rate may be impaired
- The percentage value and duration is based on the severity of the malfunction
- The hyperdrive may misfire, becoming inoperable for a short duration whilst it runs diagnostics, after which it can be initiated again
- The charging process may generate extra heat
- The charge rate may be impaired
- Whilst charging the hyperdrive generates heat
- The hyperdrive cannot be initiated if its power draw would make the total power draw of the ship exceed the ship’s power plant capacity
- Once the hyperdrive is fully charged it activates:
- The appropriate amount of fuel is removed
- The drive discharges all power
- The ship enters hyperspace
- Time-based effects (charging shields etc.) continue as normal during a hyperspace transition
- A residual opening is left, which dissipates over a duration (up to minutes)
- After a delay (a few seconds) the ship exits hyperspace at the destination area
- The player has to engage the hyperdrive again to continue the journey
There are actions that players can take which directly interact with hyperspace jumps:
- Players that have become Allies (an explicit in game selection of a "friends" flag) can slave their ships together and jump as a single entity
- All ships involved must fully charge their hyperdrive before the jump is initiated
- If any of the ships suffers a misjump, all ships misjump together
- Each slave jumping ship must remain within a set range to at least one other slave ship
- If this distance link is broken, the jump is aborted for all slaved ships
- For each additional slaved ship the chance of a malfunction causing a misjump is lowered
- Ally groups enable the strongest match-making rules, prioritizing the integrity of the group over match ups with other players if it would result in splitting the allies group
- Using a Frame Shift Wake Scanner a residual opening can be analyzed to determine the exit point of the hyperspace jump
- This analysis takes an amount of time
- It takes at least as long as the time window for tailgating (so you can’t do both)
- It must fully complete before the residual opening dissipates to give a result
- Ships can target a residual opening and attempt to “tailgate” after the ship that jumped
- The tailgater must be in close proximity to the residual opening and activate the hyperdrive
- The time window for tailgating is a fraction of residual opening’s total existence time
- There is a significant reduction in charge time for tailgating
- Fuel is expended for the jump as normal
- The tailgater suffers an amount of hull/module damage during the jump based on how close the residual opening is to dissipating
- If successful, the tailgater appears very close to arrival point of the tailgated vessel
- The tailgater must be in close proximity to the residual opening and activate the hyperdrive
- Special ship modules exist that when active can give brief forewarning of ships about to arrive nearby at a location